pbmedia/laravel-api-health

This package is abandoned and no longer maintained. No replacement package was suggested.

Monitor first and third party services and get notified when something goed wrong!

5.4.0 2022-12-09 14:08 UTC

README

⚠️ This package is unmaintained. Consider using Oh Dear.

Laravel API Health

Latest Version on Packagist Build Status Quality Score Total Downloads

This is a package to monitor first and third party services that your app uses. It can send a notification if a service goes down (or up!) and supports scheduling. You can create checkers for whatever API or service you want to monitor but it also comes with some built-in checkers so you can fire up some checkers really quickly.

Sponsor this package

We proudly support the community by developing Laravel packages and giving them away for free. Keeping track of issues and pull requests takes time, but we're happy to help! If this package saves you time or if you're relying on it professionally, please consider supporting the maintenance and development.

Requirements

  • Laravel 8.0 and 9.0 supported.
  • PHP 7.4 or higher required.
  • Support for Package Discovery.

Features

  • Built-in HTTP and Ssl Certificate checkers
  • You can build your own checkers
  • It can schedule checkers
  • Automatic retries of failed checkers
  • Sends notifications about failed checkers
  • Sends notifications when a failed checker recovers
  • Caches the status of checkers
  • You can fetch the status of checkers in your code
  • It can print the status of the checkers in the console
  • Customize notifications per checker (optionally)
  • Ability to fake the ApiHealth facade to test your app

Installation

You can install the package via composer:

composer require pbmedia/laravel-api-health

If you're still using Laravel 5.6, please use version 1.2, for Laravel 5.7 use version 2.0, for Laravel 5.8 use version 3.0. Older versions are not maintained anymore.

Publish the translation resources and config file using the Artisan CLI tool.

php artisan vendor:publish --provider="ProtoneMedia\ApiHealth\ApiHealthServiceProvider"

Upgrading to v5

  • The namespace has changed to ProtoneMedia\ApiHealth. Please update your code accordingly.

Build your first checker

So let's create our first checker. Assume you want to request an URL and verify that the status code of the response is in the 200 range. You can build this checker on your own using the make:checker command, but this one we've pre-built for you. Open up the terminal and let's make a HTTP checker!

php artisan make:http-checker LaravelDocumentationChecker

In your app folder you'll find a new Checkers folder with the newly created checker. The only thing you have to do is adjust the $url property to your needs:

<?php

namespace App\Checkers;

use GuzzleHttp\Client;
use Illuminate\Console\Scheduling\Event;
use ProtoneMedia\ApiHealth\Checkers\AbstractHttpChecker;

class LaravelDocumentationChecker extends AbstractHttpChecker
{
    /*
     * The URL you want to request.
     */
    protected $url = 'https://laravel.com/docs/6.0';

    /*
     * The method you want to use.
     */
    protected $method = 'GET';

    /*
     * Here you can specify the Guzzle HTTP options.
     *
     * @return \ProtoneMedia\ApiHealth\Checkers\AbstractHttpChecker
     */
    public static function create()
    {
        return new static(new Client, [
            // 'headers' => [
            //     'X-Foo' => ['Bar', 'Baz'],
            // ],
            // 'json'    => ['foo' => 'bar'],
            // 'timeout' => 5,
        ]);
    }

    /**
     * Defines the checker's schedule.
     *
     * @param  \Illuminate\Console\Scheduling\Event  $event
     * @return null
     */
    public function schedule(Event $event)
    {
        $event->everyMinute();

        // $event->evenInMaintenanceMode();
        // $event->onOneServer();
    }
}

Now we can run this checker in the console with the following command:

php artisan api-health:check App\\Checkers\\LaravelDocumentationChecker

Schedule your checkers

You can fill the checkers array in the config/api-health.php file with all the checkers you want to schedule. By default every checker will run every minute. The schedule method on the checker allows you to set a frequency similair to the Laravel Task Scheduler.

<?php

return [
    'checkers' => [
        \App\Checkers\LaravelDocumentationChecker::class,
    ],

    //
];

Open the App\Console\Kernel class in your editor and add the api-health:run-checkers command and set it to everyMinute(). If you don't use Laravel's Task Scheduler you could also manually create a cronjob that runs every minute. The api-health:run-checkers command will figure out what checker should run or not based on the configured schedules, if you want to ignore the scheduling and run all checkers, just run the command with the --force option.

<?php

namespace App\Console;

use Illuminate\Console\Scheduling\Schedule;
use Illuminate\Foundation\Console\Kernel as ConsoleKernel;

class Kernel extends ConsoleKernel
{
    //

    protected function schedule(Schedule $schedule)
    {
        $schedule->command('api-health:run-checkers')->everyMinute();
    }

    //
}

The result of the checker will be cached but it refreshes every time you run a checker in the console. This way you can fetch the cached result in your PHP code. This is great for checking wether a service is online without having to wait for the result.

For example, you might use a payment gateway in your app. If you check the status of the gateway every minute through the scheduler, you can respond to that status pretty accurately in your UI. You can use the ApiHealth facade to obtain the status of a checker. If you don't want to use the cache you can use the fresh method to ignore the stored state.

use App\Checkers\LaravelDocumentationChecker;
use ProtoneMedia\ApiHealth\Facades\ApiHealth;

ApiHealth::isFailing(LaravelDocumentationChecker::class);
ApiHealth::isPassing(LaravelDocumentationChecker::class);

ApiHealth::fresh()->isFailing(LaravelDocumentationChecker::class);
ApiHealth::fresh()->isPassing(LaravelDocumentationChecker::class);

Create your own checker

Building a checker is quite easy. Run the make:checker command and pass the name of your checker as an argument:

php artisan make:checker GetIpAddressByHost

There are two methods you need to fill. The create method is used as a factory to build and configure an instance of your checker. In this case it's quite simple but this the place to gather and configure your dependencies. The run methods performs the actual check and must throw a \ProtoneMedia\ApiHealth\Checkers\CheckerHasFailed exception if something goes wrong. Here is an example:

<?php

namespace App\Checkers;

use Illuminate\Console\Scheduling\Event;
use ProtoneMedia\ApiHealth\Checkers\AbstractChecker;
use ProtoneMedia\ApiHealth\Checkers\CheckerHasFailed;

class GetIpAddressByHost extends AbstractChecker
{
    public static function create()
    {
        return new static;
    }

    public function schedule(Event $event)
    {
        $event->everyMinute();
    }

    public function run()
    {
        $ip = gethostbyname('www.protone.media');

        if (!filter_var($ip, FILTER_VALIDATE_IP)) {
            throw new CheckerHasFailed("Host www.protone.media did not return a valid IP Address.");
        }
    }
}

Events

This package dispatches there different events:

  • ProtoneMedia\ApiHealth\Events\CheckerHasFailed
  • ProtoneMedia\ApiHealth\Events\CheckerHasRecovered
  • ProtoneMedia\ApiHealth\Events\CheckerIsStillFailing

Other built-in checkers

Notification options

The config file has a notifcation section which allows you to configure the channels and change the Notifiable class. There are two default notifications, CheckerHasFailed and CheckerHasRecovered, you can swap them in the config file for your own notifications. There is also an option to resend the CheckerHasFailed notification after a number of minutes:

<?php

return [
    //

    'notifications' => [
        /**
         *  Number of minutes until send the failed notification again.
         */
        'resend_failed_notification_after_minutes' => 60,

        /**
         * Class name of the failed notification.
         */
        'default_failed_notification' => \ProtoneMedia\ApiHealth\Notifications\CheckerHasFailed::class,

        /**
         * Class name of the recovered notification.
         */
        'default_recovered_notification' => \ProtoneMedia\ApiHealth\Notifications\CheckerHasRecovered::class,
    ],

    //
]

You can also set these notifications options per checker. Just modify these properties on your checker and the package will do the rest:

<?php

class MyChecker extends AbstractChecker
{
    protected $resendFailedNotificationAfterMinutes = 30;

    protected $failedNotificationClass = \App\Notifications\Whoops::class;

    protected $recoveredNotificationClass \App\Notifications\Yay::class;
}

Automatic retries

It is possible to specify a number of retries to perform before your checker gets in a failed state. When a retry occurs, a job is sent to the queue which will run the checker again. In the config file you can set the number of retries, the job to dispatch (we've created one for you!) and the configuration of the retry job such as the connection, delay and queue.

For example, if you set allowed_retries to 3 and delay to 20, the checker will run four times in total and will fail after a minute (measured from the first time you ran the checker).

<?php

// config/api-health.php

return [
    //

    'retries' => [
        /**
         * The number of allowed retries.
         */
        'allowed_retries' => 0,

        /**
         * Here you can specify the configuration of the retry job.
         */
        'job' => [
            'job' => \ProtoneMedia\ApiHealth\Jobs\RetryChecker::class,

            'connection' => null,

            'delay' => null,

            'queue' => null,
        ],
    ],

    //
]

Just as the notification options, you can set the number of allowed retries and the class of the job per checker. If you would like to interact with the job before it is sent to the queue, you could use the withRetryJob method. This method receives the job, allowing you to call any of its methods before the job is actually dispatched:

<?php

class MyChecker extends AbstractChecker
{
    protected $allowedRetries = 2;

    protected $retryJob = \App\Jobs\RetryChecker::class;

    public function withRetryJob($job)
    {
        $job->delay(now()->addMinutes(3));
    }
}

Advanced

Every checker should be able to identify itself so the state can be stored. The AbstractChecker has an id method which simply returns the name of the class, in most cases you don't have to worry about the identifier but there is a scenario in which you need to override this method. Say you want to reuse a checker with different arguments. In this example there is a Server model which has an isOnline method.

class Server extends Model
{
    public function isOnline(): bool
    {
        //
    }
}

We've generated this checker with the make:checker ServerChecker command and added a custom id method.

<?php

namespace App\Checkers;

use App\Models\Server;
use ProtoneMedia\ApiHealth\Checkers\AbstractChecker;
use ProtoneMedia\ApiHealth\Checkers\CheckerHasFailed;

class ServerChecker extends AbstractChecker
{
    public $server;

    public function __construct(Server $server)
    {
        $this->server = $server;
    }

    public static function create(Server $server)
    {
        return new static($server);
    }

    public function id(): string
    {
        return 'server_' . $this->server->id;
    }

    public function run()
    {
        if (!$this->server->isOnline()) {
            throw new CheckerHasFailed("Server {$this->server->name} is offline.");
        }
    }
}

Now if you want to verify the status of multiple server, you could easily do something like this:

<?php

use App\Models\Server;
use ProtoneMedia\ApiHealth\Runner;

$serverA = Server::whereIpAddress('1.1.1.1')->first();
$serverB = Server::whereIpAddress('8.8.8.8')->first();

$runner = new Runner([$serverA, $serverB]);

// or

$runner = new Runner(Server::all());

$onlineServers = $runner->passes();
$offlineServers = $runner->failed();

Writing tests

The ApiHealth facade has a fake method which swaps the bound instance with a fake one. This allows you to force the state of a checker. Mind that this only works on the facade, the checker itself will be untouched.

<?php

namespace App\Tests;

use App\Checkers\FailingChecker;
use App\Checkers\PassingChecker;
use ProtoneMedia\ApiHealth\Facades\ApiHealth;

class MyTest extends TestCase
{
    /** @test */
    public function it_can_make_the_passing_checker_fail()
    {
        ApiHealth::fake();

        ApiHealth::mustFail(PassingChecker::class);
        ApiHealth::mustPass(FailingChecker::class);

        $this->assertTrue(ApiHealth::isFailing(PassingChecker::class));
        $this->assertTrue(ApiHealth::isPassing(FailingChecker::class));
    }
}

Testing

composer test

Other Laravel packages

  • Laravel Analytics Event Tracking: Laravel package to easily send events to Google Analytics.
  • Laravel Blade On Demand: Laravel package to compile Blade templates in memory.
  • Laravel Cross Eloquent Search: Laravel package to search through multiple Eloquent models.
  • Laravel Eloquent Scope as Select: Stop duplicating your Eloquent query scopes and constraints in PHP. This package lets you re-use your query scopes and constraints by adding them as a subquery.
  • Laravel Eloquent Where Not: This Laravel package allows you to flip/invert an Eloquent scope, or really any query constraint.
  • Laravel FFMpeg: This package provides an integration with FFmpeg for Laravel. The storage of the files is handled by Laravel's Filesystem.
  • Laravel Form Components: Blade components to rapidly build forms with Tailwind CSS Custom Forms and Bootstrap 4. Supports validation, model binding, default values, translations, includes default vendor styling and fully customizable!
  • Laravel Mixins: A collection of Laravel goodies.
  • Laravel Paddle: Paddle.com API integration for Laravel with support for webhooks/events.
  • Laravel Verify New Email: This package adds support for verifying new email addresses: when a user updates its email address, it won't replace the old one until the new one is verified.
  • Laravel WebDAV: WebDAV driver for Laravel's Filesystem.

Changelog

Please see CHANGELOG for more information on what has changed recently.

Contributing

Please see CONTRIBUTING for details.

Security

If you discover any security related issues, please email code@protone.media instead of using the issue tracker.

Credits

License

The MIT License (MIT). Please see License File for more information.