README

This is a userland replacement for PHP's native get_browser() function, which is officially supported by the Browser Capabilities Project.

Fork: Special version for Contao 5.3 and PHP 8.3 with Monolog 2.9, used by the Contao BotDetection Bundle. Pure elimination of dependency conflicts, Contao BotDetection Bundle uses NullLogger().

Installation

Run the command below to install via Composer

composer require bugbuster/browscap-php

Then you may identify the current user agent this way:

$cache = new \MatthiasMullie\Scrapbook\Psr16\SimpleCache($doctrineFileCache); // or maybe any other PSR-16 compatible caches
$logger = new \Monolog\Logger('name'); // or maybe any other PSR-3 compatible logger

$browscap = new \BrowscapPHP\Browscap($cache, $logger);
$info = $browscap->getBrowser();

Recommended Setup

Before you can start, you have to run the browscap:fetch command to download the browscap.ini file, and use the browscap:convert command to convert it into a cache. There are two ways.

a. Download the file and convert it in two steps. The downloaded file will be stored in a local file, but there is no check if the remote file has changed. If your cache gets corrupted you only need to rerun the convert command.

vendor/bin/browscap-php browscap:fetch
vendor/bin/browscap-php browscap:convert

b. Download the file and convert it in one step. The downloaded file will not be stored in a local file, but there is a check if the remote file has changed. If your cache gets corrupted you have clean the cache and restart the process.

vendor/bin/browscap-php browscap:update

If you want to autoupdate the used cache, we recommend a separate cron job that calls the command listed above.

BC breaks in version 7.0.x

 - [BC] BrowscapPHP\Command\UpdateCommand was marked "@internal"
 - [BC] BrowscapPHP\Command\FetchCommand was marked "@internal"
 - [BC] BrowscapPHP\Command\ConvertCommand was marked "@internal"
 - [BC] BrowscapPHP\Command\CheckUpdateCommand was marked "@internal"
 - [BC] BrowscapPHP\Command\ParserCommand was marked "@internal"
 - [BC] BrowscapPHP\Helper\Filesystem was marked "@internal"

Setup Examples

$fileCache = new \League\Flysystem\Local\LocalFilesystemAdapter($cacheDir);
$filesystem = new \League\Flysystem\Filesystem($fileCache);
$cache = new \MatthiasMullie\Scrapbook\Psr16\SimpleCache(
    new \MatthiasMullie\Scrapbook\Adapters\Flysystem($filesystem)
);

$logger = new \Monolog\Logger('name');

$bc = new \BrowscapPHP\Browscap($cache, $logger);
$result = $bc->getBrowser();

NOTE: You may use any other cache which implements the PSR-16 interface.

Using the full browscap.ini file

$bc = new \BrowscapPHP\BrowscapUpdater();
$bc->update(\BrowscapPHP\Helper\IniLoaderInterface::PHP_INI_FULL);

Setting up a proxy configuration

If you are behind a proxy or need a spcific configuration, you have to set up a client instance. See into the Guzzle documentation for more information about this.

$proxyConfig = [
    'proxy' => [
        'http'  => 'tcp://localhost:8125',
        'https' => 'tcp://localhost:8124',
    ],
];
$client = new \GuzzleHttp\Client($proxyConfig);
$bcu = new BrowscapUpdater();
$bcu->setClient($client);

Usage Examples

Taking the user agent from the global $_SERVER variable

$bc = new \BrowscapPHP\Browscap();
$current_browser = $bc->getBrowser();

Using a sample useragent

$bc = new \BrowscapPHP\Browscap($cache, $logger);
$current_browser = $bc->getBrowser($the_user_agent);

the CLI commands

NOTE: If you don't want to use a file cache, you could not use the CLI commands. It is not possible to use other caches there at the moment. NOTE: Each operation (fetch, update, check-update) which fetches data from the remote host browscap.org may run into the rate limit of that site. If this happens an Exception is thrown.

Each CLI command returns zero if everything went fine.

check-update

If you only want to check if a new version of the browscap.ini is available, you can use the check-update command.

vendor/bin/browscap-php browscap:check-update

options

cache (optional) the relative path to your cache directory

return codes

1: no cached version found
2: no new version availble
3: an error occured while checking the cached version
4: an error occured while fetching the remote version
5: an other error occured

fetch

The fetch command downloads an ini file from browscap.org.

vendor/bin/browscap-php browscap:fetch

options

cache (optional) the relative path to your cache directory
remote-file (optional) only required if you dont want to download the standerd file, possible values are
- PHP_BrowscapINI downloads the standard file (default)
- Lite_PHP_BrowscapINI downloads the lite file
- Full_PHP_BrowscapINI downloads the full file
file (optional) the relative path to the local file where the remote content is stored

return codes

3: an error occured while checking the cached version
9: an error occured while fetching the remote data
10: an other error occured

convert

The convert command reads a local stored browscap.ini file and writes the contents into a cache.

vendor/bin/browscap-php browscap:convert

options

file (optional) the relative path to the local file where the remote content is stored, this should be the same file as in the fetch command
cache (optional) the relative path to your cache directory

return codes

6: the name of the file to convert is missing
7: the file to convert is not available or not readable
8: an other error occured while reading the file

update

The update command downloads an ini file from browscap.org and writes the contents into a cache. No local files are created.

vendor/bin/browscap-php browscap:update

options

remote-file(optional) only required if you dont want to download the standerd file, possible values are
- PHP_BrowscapINI downloads the standard file (default)
- Lite_PHP_BrowscapINI downloads the lite file
- Full_PHP_BrowscapINI downloads the full file
cache (optional) the relative path to your cache directory

return codes

3: an error occured while checking the cached version
9: an error occured while fetching the remote data
10: an other error occured

parse

The parse command parses a given user agent and writes the result to the console.

vendor/bin/browscap-php browscap:parse

options

user-agent (required) the user agent which should be parsed
cache (optional) the relative path to your cache directory

return codes

11: an other error occured while parsing the useragent

CLI Examples

Updating the cache using the full browscap.ini file

Note: Both ways to create/update the cache will use the standard mode file as default. If you want more detailed information you may change this with the remote-file option. Please use the help function this parameter.

vendor/bin/browscap-php browscap:update --remote-file Full_PHP_BrowscapINI

Updating a custom cache dir

Each operation expect fetch uses a cache inside the resources directory inside the project. If you update this library with composer, the cache is cleared also. If you want to avoid this and want to set your own cache folder, you can use the cache option. If you do this, you have to set a Cache Instance for this this path.

vendor/bin/browscap-php browscap:update --cache ./browscap-cache

Issues and feature requests

Please report your issues and ask for new features on the GitHub Issue Tracker at https://github.com/browscap/browscap-php/issues

Please report incorrectly identified User Agents and browser detect in the browscap.ini file here: https://github.com/browscap/browscap/issues

bugbuster / browscap-php

Maintainers

Details

README

Installation

Recommended Setup

BC breaks in version 7.0.x

Setup Examples

Using the full browscap.ini file

Setting up a proxy configuration

Usage Examples

Taking the user agent from the global $_SERVER variable

Using a sample useragent

the CLI commands

check-update

options

return codes

fetch

options

return codes

convert

options

return codes

update

options

return codes

parse

options

return codes

CLI Examples

Updating the cache using the full browscap.ini file

Updating a custom cache dir

Issues and feature requests