tomflidr / tracy
😎 Tracy: the addictive tool to ease debugging PHP code for cool developers. Friendly design, logging, profiler, advanced features like debugging AJAX calls or CLI support. You will love it.
Requires
- php: >=5.4.4
- ext-json: *
- ext-session: *
Requires (Dev)
- nette/di: ~2.3 || ~3.0.0
- nette/tester: ~1.7 || ~2.0
- nette/utils: ~2.3
Suggests
- https://nette.org/donate: Please support Tracy via a donation
Replaces
- tracy/tracy: <3.0
- v3.0.x-dev
- v2.7.4
- v2.7.3
- v2.7.2
- v2.7.1
- v2.7.0
- v2.6.x-dev
- v2.6.6
- v2.6.5
- v2.6.4
- v2.6.3
- v2.6.2
- v2.6.1
- v2.6.0
- v2.5.x-dev
- dev-master / 2.5.x-dev
- v2.5.18
- v2.5.17
- v2.5.16
- v2.5.15
- v2.5.14
- v2.5.13
- v2.5.12
- v2.5.11
- v2.5.9
- v2.5.8
- v2.5.7
- v2.5.6
- v2.5.5
- v2.5.4
- v2.5.3
- v2.5.2
- v2.5.1
- v2.5.0
- v2.4.x-dev
- v2.4.18
- v2.4.17
- v2.4.16
- v2.4.15
- v2.4.14
- v2.4.13
- v2.4.12
- v2.4.11
- v2.4.10
- v2.4.9
- v2.4.8
- v2.4.7
- v2.4.6
- v2.4.5
- v2.4.4
- v2.4.3
- v2.4.2
- v2.4.1
- v2.4.0
- v2.3.x-dev
- v2.3.12
- v2.3.11
- v2.3.10
- v2.3.9
- v2.3.8
- v2.3.7
- v2.3.6
- v2.3.5
- v2.3.4
- v2.3.3
- v2.3.2
- v2.3.1
- v2.3.0
- v2.2.x-dev
- v2.2.9
- v2.2.8
- v2.2.7
- v2.2.6
- v2.2.5
- v2.2.4
- v2.2.3
- v2.2.2
- v2.2.1
- v2.2.0
- v0.9.1
- v0.9.0
- dev-revert-341-pull-ajax
This package is auto-updated.
Last update: 2024-10-26 14:23:56 UTC
README
Introduction
Tracy library is a useful helper for everyday PHP programmers. It helps you to:
- quickly detect and correct errors
- log errors
- dump variables
- measure execution time of scripts/queries
- see memory consumption
PHP is a perfect language for making hardly detectable errors because it gives a great flexibility to programmers. Tracy\Debugger is more valuable because of that. It is a ultimate tool among the diagnostic ones. If you are meeting Tracy the first time, believe me, your life starts to be divided one before the Tracy and the one with her. Welcome to the good part!
Documentation can be found on the website.
If you like Tracy, please make a donation now. Thank you!
Installation
The recommended way to is via Composer:
composer require tomflidr/tracy
Alternatively, you can download the whole package or tracy.phar file.
Tracy 2.7.4 requires PHP version 5.4.4 or newer (supports PHP up to 8.3) and is compatible with Chrome 49+, Firefox 45+, MS Edge 12+, Safari 10+ and iOS Safari 10.2+.
Tracy 2.4 requires PHP version 5.4.4 or newer (supports PHP up to 7.2) and is compatible with Chrome 29+, Firefox 28+, IE 11+, MS Edge 12+, Safari 9+ and iOS Safari 9.2+.
Usage
Activating Tracy is easy. Simply add these two lines of code, preferably just after library loading (like require 'vendor/autoload.php'
) and before any output is sent to browser:
use Tracy\Debugger; Debugger::enable();
The first thing you will notice on the website is a Debugger Bar.
(If you do not see anything, it means that Tracy is running in production mode. For security reasons, Tracy is visible only on localhost.
You may force Tracy to run in development mode by passing the Debugger::DEVELOPMENT
as the first parameter of enable()
method.)
Debugger Bar
The Debugger Bar is a floating panel. It is displayed in the bottom right corner of a page. You can move it using the mouse. It will remember its position after the page reloading.
You can add other useful panels into the Debugger Bar. You can find interesing ones in Addons or you can create your own.
Implementation of custom panel is easy, just implement interface Tracy\IBarPanel
with two methods getTab
and getPanel
, both returning HTML content to be displayed.
Afterward, registering via Debugger::getBar()->addPanel(new CustomPanel());
is everything you will need to do.
Visualization of errors and exceptions
Surely, you know how PHP reports errors: there is something like this in the page source code:
<b>Parse error</b>: syntax error, unexpected '}' in <b>HomepagePresenter.php</b> on line <b>15</b>
or uncaught exception:
<b>Fatal error</b>: Uncaught Nette\MemberAccessException: Call to undefined method Nette\Application\UI\Form::addTest()? in /sandbox/vendor/nette/utils/src/Utils/ObjectMixin.php:100
Stack trace:
#0 /sandbox/vendor/nette/utils/src/Utils/Object.php(75): Nette\Utils\ObjectMixin::call(Object(Nette\Application\UI\Form), 'addTest', Array)
#1 /sandbox/app/forms/SignFormFactory.php(32): Nette\Object->__call('addTest', Array)
#2 /sandbox/app/presenters/SignPresenter.php(21): App\Forms\SignFormFactory->create()
#3 /sandbox/vendor/nette/component-model/src/ComponentModel/Container.php(181): App\Presenters\SignPresenter->createComponentSignInForm('signInForm')
#4 /sandbox/vendor/nette/component-model/src/ComponentModel/Container.php(139): Nette\ComponentModel\Container->createComponent('signInForm')
#5 /sandbox/temp/cache/latte/15206b353f351f6bfca2c36cc.php(17): Nette\ComponentModel\Co in <b>/sandbox/vendor/nette/utils/src/Utils/ObjectMixin.php</b> on line <b>100</b><br />
It is not so easy to navigate through this output. If you enable Tracy, both errors and exceptions are displayed in a completely different form:
The error message literally screams. You can see a part of the source code with the highlighted line where the error occurred. A message clearly explains an error. The entire site is interactive, try it.
And you know what? Fatal errors are captured and displayed in the same way. No need to install any extension (click for live example):
Errors like a typo in a variable name or an attempt to open a nonexistent file generate reports of E_NOTICE or E_WARNING level. These can be easily overlooked and/or can be completely hidden in a web page graphic layout. Let Tracy manage them:
Or they may be displayed like errors:
Debugger::$strictMode = true;
Content Security Policy
If your site uses Content Security Policy, you'll need to add 'nonce-<value>'
to script-src
and eventually the same nonce to style-src
for Tracy to work properly. Some 3rd plugins may require additional directives.
Configuration example for Nette Framework:
http: csp: script-src: nonce style-src: nonce
Faster loading
The basic integration is straightforward, however if you have slow blocking scripts in web page, they can slow the Tracy loading.
The solution is to place <?php Tracy\Debugger::renderLoader() ?>
into your template before
any scripts:
<!DOCTYPE html> <html> <head> <title>...<title> <?php Tracy\Debugger::renderLoader() ?> <link rel="stylesheet" href="assets/style.css"> <script src="https://code.jquery.com/jquery-3.1.1.min.js"></script> </head>
AJAX and redirected requests
Tracy is able to show Debug bar and Bluescreens for AJAX and redirected requests. You just have to start session before Tracy:
session_start(); Debugger::enable();
In case you use non-standard session handler, you can start Tracy immediately (in order to handle any errors), then initialize your session handler
and then inform Tracy that session is ready to use via dispatch()
:
Debugger::enable(); // initialize session handler session_start(); Debugger::dispatch();
Production mode and error logging
As you can see, Tracy is quite eloquent. It is appreciated in a development environment, but on a production server it would cause a disaster. Any debugging information cannot be listed there. Therefore Tracy has an environment autodetection and logging functionality. Instead of showing herself, Tracy stores information into a log file and shows the visitor a user-comprehensible server error message:
Production output mode suppresses all debugging information which is sent out via dump()
or Debugger::fireLog()
, and of course all error messages generated by PHP. So, even if you forget dump($obj)
in the source code, you do not have to worry about it on your production server. Nothing will be seen.
The output mode is set by the first parameter of Debugger::enable()
. You can specify either a constant Debugger::PRODUCTION
or Debugger::DEVELOPMENT
.
If it is not specified, the default value Debugger::DETECT
is used. In this case the system detects a server by IP address. The production mode is chosen if an application is accessed via public IP address. A local IP address leads to development mode. It is not necessary to set the mode in most cases. The mode is correctly recognized when you are launching the application on your local server or in production.
In the production mode, Tracy automatically captures all errors and exceptions into a text log. Unless you specify otherwise, it will be stored in log/error.log. This error logging is extremely useful. Imagine, that all users of your application are actually betatesters. They are doing cutting-edge work for free when hunting bugs and you would be silly if you threw away their valuable reports to a recycle bin unnoticed.
If you need to log your own messages or caught exceptions, use the method log()
:
Debugger::log('Unexpected error'); // text message try { criticalOperation(); } catch (Exception $e) { Debugger::log($e); // log exception // or Debugger::log($e, Debugger::ERROR) // also sends an email notification }
A directory for errors logging can be set by the second parameter of the enable() method:
Debugger::enable(Debugger::DETECT, __DIR__ . '/mylog');
If you want Tracy to log PHP errors like E_NOTICE
or E_WARNING
with detailed information (HTML report), set Debugger::$logSeverity
:
Debugger::$logSeverity = E_NOTICE | E_WARNING;
For a real professional the error log is a crucial source of information and he or she wants to be notified about any new error immediately. Tracy helps him. She is capable of sending an email for every new error record. The variable $email identifies where to send these e-mails:
Debugger::$email = 'admin@example.com';
To protect your e-mail box from flood, Tracy sends only one message and creates a file email-sent
. When a developer receives the e-mail notification, he checks the log, corrects his application and deletes the email-sent
monitoring file. This activates the e-mail sending again.
Variable dumping
Every debugging developer is a good friend with the function var_dump
, which lists all contents of any variable in detail. Unfortunately, its output is without HTML formatting and outputs the dump into a single line of HTML code, not to mention context escaping. It is necessary to replace the var_dump
by a handier function. That is just what dump()
is.
$arr = array(10, 20.2, true, null, 'hello'); dump($arr); // or Tracy\Debugger::dump($arr);
generates the output:
You can also change the nesting depth by Debugger::$maxDepth
and displayed strings length by Debugger::$maxLength
. Naturally, lower values accelerate Tracy rendering.
Debugger::$maxDepth = 2; // default: 3 Debugger::$maxLength = 50; // default: 150
The dump()
function can display other useful information. Tracy\Dumper::LOCATION_SOURCE
adds tooltip with path to the file, where the function was called. Tracy\Dumper::LOCATION_LINK
adds a link to the file. Tracy\Dumper::LOCATION_CLASS
adds a tooltip to every dumped object containing path to the file, in which the object's class is defined. All these constants can be set in Debugger::$showLocation
variable before calling the dump()
. You can set multiple values at once using the |
operator.
Debugger::$showLocation = Tracy\Dumper::LOCATION_SOURCE; // Shows path to where the dump() was called Debugger::$showLocation = Tracy\Dumper::LOCATION_CLASS | Tracy\Dumper::LOCATION_LINK; // Shows both paths to the classes and link to where the dump() was called Debugger::$showLocation = false; // Hides additional location information Debugger::$showLocation = true; // Shows all additional location information
Very handy alternative to dump()
is dumpe()
(ie. dump and exit) and bdump()
. This allows us to dump variables in Debugger Bar. This is useful, because dumps don't mess up the output and we can also add a title to the dump.
bdump([2, 4, 6, 8], 'even numbers up to ten'); bdump([1, 3, 5, 7, 9], 'odd numbers up to ten');
Timing
Another useful tool is the debugger stopwatch with a precision of microseconds:
Debugger::timer(); // sweet dreams my cherrie sleep(2); $elapsed = Debugger::timer(); // $elapsed = 2
Multiple measurements at once can be achieved by an optional parameter.
Debugger::timer('page-generating'); // some code Debugger::timer('rss-generating'); // some code $rssElapsed = Debugger::timer('rss-generating'); $pageElapsed = Debugger::timer('page-generating');
Debugger::timer(); // runs the timer ... // some time consuming operation echo Debugger::timer(); // elapsed time in seconds
FireLogger
You cannot always send debugging information to the browser window. This applies to AJAX requests, or generating XML files to output. In such cases, you can send the messages by a separate channel into FireLogger. Error, Notice and Warning levels are sent to FireLogger window automatically. It is also possible to log suppressed exceptions in running application when attention to them is important.
How to do it?
Firefox:
- install extension Firebug and FireLogger
- turn on Firebug (using F12 key), enable tabs Net and Logger (stay on Logger)
Chrome:
- install extension FireLogger for Chrome
- turn on Chrome DevTools (using Ctrl-Shift-I key) and open Console
Navigate to demo page and you will see messages sent from PHP.
Because Tracy\Debugger communicates with FireLogger via HTTP headers, you must call the logging function before the PHP script sends anything to output. It is also possible to enable output buffering and delay the output.
use Tracy\Debugger; Debugger::fireLog('Hello World'); // send string into FireLogger console Debugger::fireLog($_SERVER); // or even arrays and objects Debugger::fireLog(new Exception('Test Exception')); // or exceptions
The result looks like this:
Ports
This is list of unofficial ports to another frameworks and CMS than Nette:
- Drupal 7
- Laravel framework: recca0120/laravel-tracy, whipsterCZ/laravel-tracy
- OpenCart
- ProcessWire CMS/CMF
- Slim Framework
- Symfony framework: kutny/tracy-bundle, VasekPurchart/Tracy-Blue-Screen-Bundle
- Wordpress
... feel free to be famous, create a port for your favourite platform!