README

SEVOTRANSACT PHP SDK

Sevotransact Payment Gateway PHP SDK _{^{Can be used with your favorite framework or your plain PHP project.}}

Installation

The package can be installed via composer. Install it if you don't have it yet. Then open a terminal in your project root folder and run:

composer require prinx/sevotransact

Usage

First create a .env file in your project root folder, if you don't have any already.

Next, configure the .env by putting your sevotransact credentials and account informations:

#...

SEVOTRANSACT_ID=your_sevotransact_id
SEVOTRANSACT_KEY=your_sevotransact_key
SEVOTRANSACT_ACCOUNT=your_sevotransact_account
SEVOTRANSACT_NICKNAME=your_sevotransact_nickname
SEVOTRANSACT_DESCRIPTION=your_sevotransact_description
SEVOTRANSACT_PRIMARY_CALLBACK=primary_callback
SEVOTRANSACT_SECONDARY_CALLBACK=secondary_callback

The primary and secondary callbacks are URL where SEVOTRANSACT will send the result of the transaction. YOu can check how to handle the transaction callback here.

The secondary callback is optional.

Request a payment

require 'path/to/vendor/autoload.php'; // Not needed if using a framework.

use Prinx\Sevotransact\MobileMoney;

$payment = new MobileMoney;

$amount = 1; // 1 GHC
$phone = '233...';
$network = 'MTN'; // MTN|AIRTEL|VODAFONE

$request = $payment->request($amount, $phone, $network);

Voucher code

Some networks (typically VODAFONE) require the user to generate a voucher code. This code can be easily passed to the request:

$request = $payment->request($amount, $phone, $network, $voucherCode);

// or

$payment->setVoucherCode($voucherCode);
$request = $payment->request($amount, $phone, $network);

The voucher code is now optional. If not passed, the user will directly receive a prompt on their phone to accept the transaction.

Mobile money request response

The mobile money request will automatically return a response from which you can determine if the request is being processed or not.

$request = $payment->request($amount, $phone, $network);

if ($request->isBeingProcessed()) {
    $status = $request->getStatus();

    // ...
} else {
    $error = $request->getError();

    // ...
}

WARNING: This response is just to notify you that your request has been received and is been processed or something went wrong when sending the request. This is not the actual response of the mobile money request. The actual response of the mobile money request will be sent to your provided callback URL.

Process callback

The result of the transaction will be sent to the callback URL provided when sending the request. To process the callback, create a new route in your favorite framework, or create an php file in your project to handle the callback. The URL resolving to that route or that file is (must be) the one you provided in the .env. as callback URL.

Now you can create a callback instance that will receive the status of your transactions:

// File: callback.php

require 'path/to/vendor/autoload.php';

use Prinx\Sevotransact\Callback;

$callback = new Callback;

Or if you are using a framework and the callback route is handled by a controller:

// This is just an example.
// Write your controller the way you are used to with your favorite framework.

namespace Controllers;

use Prinx\Sevotransact\Callback;

class MobileMoneyCallbackController extends Controller
{
    public function processCallback()
    {
        $callback = new Callback;
    }
}

We can now register the callback functions that will be run on success, failure or some defined custom condition of the mobile money transaciton. The callback functions will receive the $callback instance.

$callback->success(function (Callback $callback) {
    // Transaction was successful. Do stuff.
})->failure(function (Callback $callback) {
    // Transaction failed. Do stuff.
})->always(function (Callback $callback) {
    // Do stuff whether transaction was successful or not.
});

You are not require to use all the callbacks. Just use the one that is needed.

Now, run everything, by calling the process method on the callback.

$callback->process();

The full code will be:

$callback = new Callback;

$callback->success(function (Callback $callback) {
    //
})->failure(function (Callback $callback) {
    //
})->always(function (Callback $callback) {
    //
})->process();

TIP: In case you have only one callback function that will be run whether the transaction is successful or not, you can simply pass the function to the process method:

$callback = new Callback;

$callback->process(function (Callback $callback) {
    //
});

Successful transaction

The code of the transaction determines if the transaction is successful or has failed. By default, the successful transaction codes are in the array returned by $callback->getSuccessCodes(). You can decide (for any reason it may be) to consider a failure code as success code by adding it to the success codes with the $callback->addSuccessCode($code) method.

The `on` method

The on method is a powerful way of listening to the transaction request callbacks. It takes as first parameter an array of conditions that can match the request payload and as second parameter a callback function that will be run if the conditions match the payload.

A string can be passed as condition, then it will be considered as the code sent in the payload to the callback URL.

use Prinx\Sevotransact\Callback;

$callback = new Callback;

$callback->on('000', function (Callback $callback) {
    //
})->on('101', function (Callback $callback) {
    //
})->on(['code' => '000', 'phone' => '233...'], function (Callback $callback) {
    //
})->success(function (Callback $callback){
    // We can still chain the success or failure methods.
})->failure(function (Callback $callback) {
    //
})->process();

The Callback class implements the fluent interface. You can chain most of its methods (like the on, success, failure methods), in any order.

The callbacks will be run in the order they were registered.

The payload

A payload is sent to the callback URL. It contains 8 parameters:

code

The code of the request.

$requestCode = $callback->getCode();

status

$requestStatus = $callback->getStatus(); // approved, declined...

details

The detail message of the status.

$requestDetails = $callback->getDetails();

id

The transaction ID.

$transactionId = $callback->getId();

phone

The phone number to which the request was made.

$phone = $callback->getPhone(); // 233...

network

The network to which belong the phone number.

$network = $callback->getNetwork(); // MTN, AIRTEL, VODAFONE, ...

amount

The amount of the transaction.

$amount = $callback->getAmount();

currency

The currency in which the transaction was made.

$currency = $callback->getCurrency(); // GHS

You can get all the payload array by calling the getPayload method without parameter.

$payload = $callback->getPayload();

You can also get any of the payload parameters by passing the name of the parameter to the getPayload method, for example:

$transactionId = $callback->getPayload('id');
$transactionCode = $callback->getPayload('code');

Message associated to the request

You can get the message associated to the request by calling the message method of the callback instance.

$message = $callback->getMessage();

The message is associated to the code in the payload.

Messages

These are the possible messages:

[
    '000'     => 'Transaction successful. Your transaction ID is '.$transactionId,
    '101'     => 'Transaction failed. Insufficient fund in wallet.',
    '102'     => 'Transaction failed. Number non-registered for mobile money.',
    '103'     => 'Transaction failed. Wrong PIN. Transaction timed out.',
    '104'     => 'Transaction failed. Transaction declined',
    '114'     => 'Transaction failed. Invalid voucher',
    '909'     => 'Transaction failed. Duplicate transaction id.',
    'default' => 'Transaction failed.',
];

Using the mobile money callback instance in the closure

The callback instance is automatically passed to the closure. You can then use it as below:

$callback->success(function (Callback $callback) {
    $message = $callback->getMessage();
});

Passing other parameter(s) to the closure

You can easily pass other parameters to the closure by using the PHP use keyword on the closure:

// SmsService is your own implementation.
$sms = new SmsService();

$callback->success(function (Callback $callback) use ($sms) {
    $message = $callback->getMessage();
    $phone = $callback->getPhone();

    $sms->send($message, $phone);
});

Using a class to handle callbacks

Instead of directly passing the callbacks closures to the success, failure or on methods, you can move all the callbacks to a class and just pass the class to the process method.

First, create a class containing a callbacks methods:

class CallbackHandler
{
    public function callbacks(Callback $callback)
    {
        //
    }
}

The callbacks method must return an array containing the mapping of your conditions with the callback closures:

class CallbackHandler
{
    public function callbacks(Callback $callback)
    {
        return [
            ['000', function (Callback $callback) {
                $message = $callback->getMessage();
            }],
            ['101', function (Callback $callback) {
                //
            }],
        ];
    }
}

The mappings can be duplicated:

class CallbackHandler
{
    public function callbacks(Callback $callback)
    {
        return [
            ['000', function (Callback $callback) {
                //
            }],
            ['000', function (Callback $callback) {
                // Another callback that will be run for the same code.
            }],
            ['101', function (Callback $callback) {
                //
            }],
        ];
    }
}

Or you can rather passed an array of closures:

class CallbackHandler
{
    public function callbacks(Callback $callback)
    {
        return [
            ['000', [
                function (Callback $callback) {
                    //
                },
                function (Callback $callback) {
                    // Another callback that will be run for the same code.
                },
            ]],
            ['101', function (Callback $callback) {
                //
            }],
        ];
    }
}

You can pass the custom conditions success, failure or always:

class CallbackHandler
{
    public function callbacks(Callback $callback)
    {
        return [
            ['success', function (Callback $callback) {
                //
            }],
            ['failure', function (Callback $callback) {
                //
            }],
            ['always', function (Callback $callback) {
                //
            }],
        ];
    }
}

You can also pass an array of conditions:

class CallbackHandler
{
    public function callbacks(Callback $callback)
    {
        return [
            [['code' => '000', 'phone' => '233...'], function (Callback $callback) {
                    //
            }],
        ];
    }
}

All these can be mixed according to your need:

class CallbackHandler
{
    public function callbacks(Callback $callback)
    {
        return [
            ['000', function (Callback $callback) {
                //
            }],
            [['code' => '000', 'phone' => '233...'], function (Callback $callback) {
                //
            }],
            ['success', function (Callback $callback) {
                //
            }],
            ['always', function (Callback $callback) {
                //
            }],
        ];
    }
}

Instead of returning directly closures in the callbacks methods, you can create public methods in the callback handler class and reference those methods in the array returned in the callbacks method:

class CallbackHandler
{
    public function callbacks(Callback $callback)
    {
        return [
            ['000', 'sendSms'],
            ['101', ['notifyAdmin', 'sendSms']]
            ['always', 'log'],
        ];
    }

    public function notifyAdmin(Callback $callback)
    {
        // Notify admin...
    }

    public function sendSms(Callback $callback)
    {
        //
    }

    public function log(Callback $callback)
    {
        //
    }
}

After writing the callback handler class, you just need to pass it to the process method:

// Do not forget to import the class from it namespace
use App\Helpers\CallbackHandler;

$callback = new Callback;

$callback->process(CallbackHandler::class);

Logging

Logging locally

You can provide a log folder where the transactions will be automatically logged.

$callback->setLogFolder($path);

If no folder has been set, a default log folder will be created at YOUR_PROJECT_ROOT_FOLDER/storage/logs/sevotransact/.

You can disable local logs by using the env variable (It is enabled by default):

SEVOTRANSACT_LOCAL_LOG_ENABLED=false

Logging to SLACK

You can provide in your .env file a slack webhook to automatically log transactions to slack.

SEVOTRANSACT_SLACK_LOG_WEBHOOK=https://

You can disable logging to SLACK by putting in the .env:

SEVOTRANSACT_SLACK_LOG_ENABLED=false

It is enabled by default.

Disable logs

To disable the whole logging system, put in your .env file:

SEVOTRANSACT_LOG_ENABLED=false

Contribute

Star ⭐ the repo, fork it, fix a bug, add a new feature, write tests, correct documentation, and submit a pull request.

License

MIT

prinx / sevotransact

Maintainers

Details

README

SEVOTRANSACT PHP SDK

Installation

Usage

Request a payment

Voucher code

Mobile money request response

Process callback

Successful transaction

The `on` method

The payload

code

status

details

id

phone

network

amount

currency

Message associated to the request

Messages

Using the mobile money callback instance in the closure

Passing other parameter(s) to the closure

Using a class to handle callbacks

Logging

Logging locally

Logging to SLACK

Disable logs

Contribute

License

prinx / sevotransact

Maintainers

Details

README

SEVOTRANSACT PHP SDK

Installation

Usage

Request a payment

Voucher code

Mobile money request response

Process callback

Successful transaction

The on method

The payload

code

status

details

id

phone

network

amount

currency

Message associated to the request

Messages

Using the mobile money callback instance in the closure

Passing other parameter(s) to the closure

Using a class to handle callbacks

Logging

Logging locally

Logging to SLACK

Disable logs

Contribute

License

The `on` method