README

Laravel is a web application framework with expressive, elegant syntax. It's one of the most popular PHP frameworks today.

Laraish brings the Laravel Framework into WordPress, which allow us to have all the benefits of Laravel. So you can create themes with less effort, more enjoyment!

Requirement
What Laraish is and is not
What's the difference between the original Laravel?
Get Started
Known Issue
- Composer race condition

Requirement

The 99% of Laraish is just the regular full stack PHP Framework Laravel. So if you have never heard of it, you're going to want to take a look at it before you can go any further.

For those who are already familiar with Laravel, it should be a piece of cake for you to get started with Laraish.

What Laraish is and is not

Laraish is not a framework for general purpose WordPress theme development.

Yes, it is a framework but not for general WordPress theme development. Laraish is aimed at helping create "homemade theme" rather than general purpose theme. So if you want to create themes with a bunch of theme options for sales or just for free distribution, you probably want to take a look at the following frameworks instead.

What's the difference between the original Laravel?

I'd say almost no differences there, except some additional tweaking, which gets Laravel to work well inside a WordPress theme. So basically you could do anything that you could do with Laravel, it's just the regular Laravel inside a WordPress theme. If you are curious about what exactly have been modified, taking a diff to the original Laravel would make sense for you.

Get Started

Installation

You can install Laraish by issuing the following command via Composer.

composer create-project --prefer-dist laraish-maintain/laraish <theme-name>

Note that the MySQL server and the web server must be running before you can issue the composer create-project command to install Laraish. Because after Composer finishes the installation, it's going to run an artisan command, which requires MySQL server and the web server that host the WordPress be running at the time you issuing the command.

Also, notice that if you are on Mac and use MAMP or similar application to create your local server environment you may need to change your $PATH environment variable to make Composer use the PHP binary that MAMP provides rather than the OS's built-in PHP binary.

Routing

Laraish replaced the original UriValidator(Illuminate\Routing\Matching\UriValidator) with its own one to allow you to specify WordPress specific routes, like "archive" or "page" or "custom post type" ex.

You define your WordPress-specific-routes in the routes/wp.php file.

For example:

use App\Http\Controllers\Wp\Home;
use App\Http\Controllers\Wp\Page;
use App\Http\Controllers\Wp\Post;
use App\Http\Controllers\Wp\NotFound;
use Laraish\Support\Facades\WpRoute;

// Regular post pages
WpRoute::post('post', [Post::class, 'index']);

// Post pages where post-type is 'movie'
WpRoute::post('movie', [Post::class, 'index']);

// The archive page of "movie" post type.
WpRoute::postArchive('movie', [Home::class, 'index']);

// The child page "works" of the "about" page.
WpRoute::page('about.works', [Page::class, 'index']);

// Any child pages of the "about" page.
WpRoute::page('about.*', [Page::class, 'index']);

// Any descendant pages of the "about" page.
WpRoute::page('about.**', [Page::class, 'index']);

// The "about" page ("about" is the slug of the page)
WpRoute::page('about', [Page::class, 'index']);

// The archive page of "foobar" term of "category" taxonomy.
WpRoute::taxonomy('category.foobar', [Home::class, 'index']);

// The archive page of "category" taxonomy.
WpRoute::taxonomy('category', [Home::class, 'index']);

// The archive page of author "jack".
WpRoute::author('jack', [Home::class, 'index']);

// The archive page for all authors.
WpRoute::author([Home::class, 'index']);

// The search result page
WpRoute::search([Home::class, 'index']);

// All pages
WpRoute::page([Page::class, 'index']);

// The home/front page.
WpRoute::home([Home::class, 'index']);

// All archive pages.
WpRoute::archive([Home::class, 'index']);

// The 404 page.
WpRoute::notFound([NotFound::class, 'index']);

Here are some notes you should keep in mind.

You can use a "dot notation" to specify the hierarchy for pages and taxonomies.
You can use the wild card to specify any child/descendant page/term of a parent/ancestor page/term.
You should care about the order of your routes. Routes that has a higher specificity should be placed more above than the routes that have a lower specificity.

Route order

The position of the route is very important.

Here is a bad example:

use App\Http\Controllers\Wp\Page;
use Laraish\Support\Facades\WpRoute;

WpRoute::page([Page::class, 'index']);
WpRoute::page('works', [Page::class, 'works']);

The problem of this code is that the second route will never get matched. Because the first route matches to any pages, so all routes after the first one will be simply ignored. That is, routes that has a higher specificity should be placed above the routes that have a lower specificity.

Auto-Discovery Routing

If you don't like to specify a route manually, you could always use the auto-discovery strategy instead. By turning on auto discovery routing, Laraish resolves the controller or view automatically the way similar to WordPress.

Use Auto-Discovery Routing in the route file.

use App\Http\Controllers\Wp\Home;
use App\Http\Controllers\Wp\Page;
use Laraish\Support\Facades\WpRoute;

WpRoute::home([Home::class, 'index']);
WpRoute::page([Page::class, 'index']);

// Fallback to auto discovery routing.
WpRoute::autoDiscovery();

Notice that you should always place auto discovery routing in the last line of your route file.

With this featured turned on, Laraish will try to find a controller or view that matches to the following naming convention.

in the <ViewRoot>/wp directory:

home.blade.php
search.blade.php
archive.blade.php
post.blade.php
post
- {$post_type}.blade.php
post-archive
- {$post_type}.blade.php
page.blade.php
page
- {$page_slug}.blade.php
- {$page_slug}
  - {$child_page}.blade.php
  - …
template
- {$template_slug}.blade.php
taxonomy.blade.php
taxonomy
- {$taxonomy}.blade.php
- {$taxonomy}
  - {$term}.blade.php
  - {$term}
    - {$child_term}.blade.php
    - …
author.blade.php
- {$nicename}.blade.php

Same rule applied to the controllers under the namespace App\Http\Controllers\Wp.

For example, If the coming request is for a page called "foo", it'll try to :

Find a controller action in the following order.
- App\Http\Controllers\Wp\Page\Foo@index.
- App\Http\Controllers\Wp\Page@index.
If no controller action found, try to find a view file in the following order (if any, pass the $post object as the view data).
- <ViewRootDir>/wp/page/foo.blade.php.
- <ViewRootDir>/wp/page.blade.php.

As you can see, the searching paths will follow the hierarchy of the queried object. In the above example queried object is the page foo. Same rule will be applied to taxonomy or post archive Etc.

If Laraish could resolve the route, it'll passes some default view data according to the type of queried object :

page
- $post
post archive
- $posts
taxonomy archive
- $term
- $posts
home
- $post if it's a "frontpage", otherwise $posts

Where $post is a Post model object, and $posts is a Laraish\Support\Wp\Query\QueryResults object contains a collection of posts.

By default, the post model will be Laraish\Support\Wp\Model\Post, but it'll try to locate a custom model in \App\Models\Wp\Post first.

For example, if the queried object is a custom post type "movie", it will try to use \App\Models\Wp\Post\Movie if such a class found. Same rule applied to the taxonomy too, but the searching path will be \App\Models\Wp\Taxonomy instead.

Notice that if you want to use template for pages or posts, you should register them in theme.php.

Use Auto-Discovery Routing in the Controller.

Not only in the route file, you could also use the resolveView method in the controller to let Laraish resolve the view file automatically.

Here is an example shows how you can use utilize the resolveView in a controller.

In the routes/wp.php file :

use App\Http\Controllers\Wp\Page;
use Laraish\Support\Facades\WpRoute;

WpRoute::page([Page::class, 'index']);

In the controller :

namespace App\Http\Controllers\Wp;

use App\Http\Controllers\Controller;

class Page extends Controller
{
    public function index()
    {
        $data = [ 'foo' => 'bar' ];
        
        // Let Laraish figure out the view file.
        // 'wp.page' is the default view if no matched view found. 
        return $this->resolveView('wp.page', $data);
    }
}

In the above example, if the coming request is for a page called "foo", it'll try to find a view file from the following paths:

<ViewRootDir>/wp/page/foo.blade.php.
<ViewRootDir>/wp/page.blade.php.

Regular Route

Alone with the WordPress routes, you can even write your own routes by URI, and it just works. Just be careful do not write regular routes to the routes/wp.php file ( technically you could, but I would not recommend ). For instance, write them to the routes/web.php file.

use Illuminate\Support\Facades\Route;

// This will use the original UriValidator of Laravel.
Route::get('/my/endpoint', function () {
    return 'Magic!';
});

Keep in mind that routes in routes/wp.php has the lowest priority of all the routes in the routes directory.

Models

Laraish comes with some general purpose models like Post or Term model. Note that they are not an implementation of ORM like the Laravel's Eloquent Model. They are just a simple wrapper for WordPress's APIs that encapsulate some common logic to help you simplify your business logic.

You can find those models in Laraish\Support\Wp\Model. Because the Post model is the most frequently used model, for convenience, a Post Class that extends the Laraish\Support\Wp\Model\Post has brought to your app/Models directory already.

Let's take a look at an example.

Say you have a route like this :

WpRoute::archive('\App\Http\Controllers\Wp\Archive@index');

In your controller app\Http\Controllers\Wp\Archive :

<?php

namespace App\Http\Controllers\Wp;

use App\Http\Controllers\Controller;
use App\Models\Post;

class Archive extends Controller
{
    public function index()
    {
        $data = [
            'posts' => Post::queriedPosts() // get the posts for current page
        ];

        return $this->view('wp.archive', $data);
    }
}

In your view wp.archive :

<main class="posts">
    @foreach($posts as $post)
        <section class="post">
            <a class="post" href="{{ $post->permalink }}">
                <img class="post__thumbnail" src="{{ $post->thumbnail->url }}" alt="{{ $post->title }}">
            </a>
            <time class="post__time" datetime="{{ $post->dateTime }}">{{ $post->date }}</time>
            <a class="post__category" href="{{ $post->category->url }}">{{ $post->category->name }}</a>
            <h1 class="post__title">{{ $post->title }}</h1>
        </section>
    @endforeach

    {{  $posts->getPagination() }}
</main>

As you can see in the example above, you can get common properties of a post, like $post->permalink or $post->title etc.

Actually, those properties are not "real properties". When you access property like $post->permalink, under the hood, it'll call $post->permalink() to get the value for you automatically, and from the second time when you access the same property, it won't call $post->permalink() again, instead, it'll return the cached value from previous calling result. If you don't want to use cached value, you can call the method explicitly like $post->title().

Also, feel free to create your own "properties" by adding public methods to your model class.

Take a look at Laraish\Support\Wp\Model, there are some predefined "properties" that you may want to use.

Cast Model to JSON

As I mentioned earlier, models that comes with Laraish are not real models. If you want to cast a "model" to JSON, you must specify the attributes you want output in the $visible property.

For example:

<?php
namespace App\Models;

use Laraish\Support\Wp\Model\Post as BaseModel;

class Post extends BaseModel
{
    protected $visible = [
        'title',
        'thumbnail',
        'content'
    ];
}

Now you can call $post->toJson() to get the serialized json string of the post object.

The `@loop` blade directive

Laraish also added a @loop blade directive for simplifying "The Loop" in WordPress.

for example:

@loop($posts as $post)
	{{ get_the_title() }}
@endloop

will be compiled to

<?php foreach($posts as $post): setup_the_post( $post->wpPost ); ?>
                
    <?php echo e(get_the_title()); ?>

<?php endforeach; wp_reset_postdata(); ?>

where $post should be a Post model object.

Usually you don't want to use the @loop directive. Because it'll introduce some unnecessary overheads. Keep in mind that always prefer @foreach to @loop. Except you want to access some properties like content or excerpt which requiring must be retrieved within "The Loop", otherwise never use the @loop actively.

Theme Options

Setup the custom post type, register the navigation menus ... There always are some common tasks you have to deal with when you start to build a WordPress theme. The app/config/theme.php is where you define all your common tasks.

Some basic options are predefined for you. Take a look at the config/theme.php.

Also, you can create your own options by adding new static methods to the App\Providers\ThemeOptionsProvider. The name of the method will become to an option.

Actions and Filters

You define your actions and filters in App\Providers\EventServiceProvider just like the laravel's event.

The following example adding a pre_get_posts action, and the handle method of App\Listeners\MainQueryListener will be called for this action.

<?php

namespace App\Providers;

use Laraish\Foundation\Support\Providers\EventServiceProvider as ServiceProvider;

class EventServiceProvider extends ServiceProvider
{
    /**
     * Register the WordPress actions
     * @var array
     */
    protected $action = [
            'pre_get_posts' => 'App\Listeners\MainQueryListener'
    ];

    /**
     * Register the WordPress filters
     * @var array
     */
    protected $filter = [];
}

Pagination

You can get the pagination by calling the getPagination method of Post.

use App\Models\Post;

$posts = Post::queriedPosts();

<div>
	{{  $posts->getPagination() }}
</div>

By providing additional parameters, you can specify the view file and several options. See laraish/pagination for more details.

Work with ACF

The model classes comes with Laraish works seamlessly with ACF out of the box.

Get the value of custom field from model

For example, suppose that you have created a custom field with ACF named foobar. Then you can access the field's value like this:

use App\Models\Post;

$post = new Post(123); 
// As with the `Post` model, these models works the same way. 
// `Laraish\Support\Wp\Model\User`
// `Laraish\Support\Wp\Model\Term` 


// This make it call the magic method to get the value of the custom field `foobar`. 
$foobar = $post->foobar;

Data Type Casting

You can determine if or not or how to cast the data type retrieved from ACF at config/theme.php.

The default behavior is casting any of these types to Laraish's model:

WP_Post → Laraish\Support\Wp\Model\Post
WP_User → Laraish\Support\Wp\Model\User
WP_Term → Laraish\Support\Wp\Model\Term

Additionally, casting any assoc array to stdClass.

The `ShareViewData` Middleware

Laraish comes with a middleware app/Http/Middleware/ShareViewData.php. This is your best place to define any shared view data or view composers.

Options page

Perhaps creating options pages is one of the most tedious tasks. If you've used the WordPress's API to create options pages, you know how dirty the code is going to be…

Laraish provides a powerful and yet clean API to help you creating the options pages.

See laraish/options for more details.

View debugger

Sometimes, you just want to get some basic information about the current view(page) being displayed. For example, the path of the view file, or the name of the controller that was used.

To get the basic information of the current view being displayed, you include the ViewDebbuger trait in your App\Http\Controllers. Make sure you have called wp_footer() in your view, then open your console of your browser, and you could find something like this:

{
    "view_path": "/var/www/example/wp-content/themes/example/resources/views/singular/news.blade.php",
    "compiled_path": "/var/www/example/wp-content/themes/example/storage/framework/views/befa3e2a2cb93be21c6ebf30a60824a5d2a2ed11.php",
    "data": {
        "post": {}
    },
    "controller": "App\\Http\\Controllers\\Singular\\News"
}

Note that when APP_ENV=production is set in your .env file, nothing will be outputted to the console.

Run artisan command

As I mentioned in the Installation section. To run an artisan command, you have to meet the following conditions.

The MySQL server and the web server must be running.
If you are on Mac and use MAMP or similar application to create your local server environment you may need to change your $PATH environment variable to make Composer use the PHP binary that MAMP provides rather than the OS's built-in PHP binary.

Security Concerns

Notice that Laraish is just a regular WordPress theme. Therefore, not only the public directory but all the files and directories inside the theme are accessible from outside.

Laraish comes with two .htaccess files to deny any accesses against any files and directories inside the theme except the following files:

style.css
screenshot.png
public/**

If you don't use Apache, you should have your server software configured to have the same access control just like the above one.

Known Issue

Composer race condition

If you have a plugin using Composer, and that plugin has the same dependency as your theme(Laraish) has, may lead to a problem when they are using a different version of that dependency.

In such a situation, it'll require multiple Composer Autoloaders(vendor/autoload.php), and the last loaded one will take priority over the previous ones.

Say you have a plugin that depends on the package Foo (v1.2.0), and your theme depends on the same package Foo (v2.0.1); such a situation may lead to load the unintended version of Foo. Which version will be used depend on the time the autoloader.php was loaded and the time the package(class) was used.

Being that said, this is not a Composer specific issue. I'd say it's a WordPress issue that needs to be solved somehow.

Here are some articles discussing this issue in WordPress.

If you are planing to publish this theme for general use, make sure you have your theme namespaced by using tools like PHP Scoper.

laraish-maintain / laraish

Maintainers

Details

README

Table of contents

Requirement

What Laraish is and is not

What's the difference between the original Laravel?

Get Started

Installation

Routing

Route order

Auto-Discovery Routing

Use Auto-Discovery Routing in the route file.

Use Auto-Discovery Routing in the Controller.

Regular Route

Models

Cast Model to JSON

The `@loop` blade directive

Theme Options

Actions and Filters

Pagination

Work with ACF

Get the value of custom field from model

Data Type Casting

The `ShareViewData` Middleware

Options page

View debugger

Run artisan command

Security Concerns

Known Issue

Composer race condition

laraish-maintain / laraish

Maintainers

Details

README

Table of contents

Requirement

What Laraish is and is not

What's the difference between the original Laravel?

Get Started

Installation

Routing

Route order

Auto-Discovery Routing

Use Auto-Discovery Routing in the route file.

Use Auto-Discovery Routing in the Controller.

Regular Route

Models

Cast Model to JSON

The @loop blade directive

Theme Options

Actions and Filters

Pagination

Work with ACF

Get the value of custom field from model

Data Type Casting

The ShareViewData Middleware

Options page

View debugger

Run artisan command

Security Concerns

Known Issue

Composer race condition

The `@loop` blade directive

The `ShareViewData` Middleware