README

Multicast DNS (mDNS) resolver and responder with service discovery (DNS-SD) based on ReactPHP

Resolver

The resolver implements React\Dns\Resolver\ResolverInterface, so it can be used in connectors.

use SharkyDog\mDNS;
use React\Dns\Config\Config as DnsConfig;
use React\Dns\Resolver\Factory as DnsFactory;

$domain = 'homeassistant.local';

$dnsConfig = DnsConfig::loadSystemConfigBlocking();
$dnsResolver = (new DnsFactory)->create($dnsConfig);

$resolver = new mDNS\React\Resolver(2,true,$dnsResolver);
$resolver->resolve($domain)->then(
  function($addr) {
    print "Found IP ".$addr."\n";
  },
  function(\Exception $e) {
    print "Error: ".$e->getMessage()."\n";
  }
);

Constructor

public function __construct(int $timeout=2, bool $unicast=true, ?ResolverInterface $dnsResolver=null);

Timeout is in seconds.
If $unicast is true, queries are sent with dynamic source port, mDNS responders should send an unicast reply. If false, queries are sent with source port 5353 and resolver listens in multicast group.
If $dnsResolver is supplied, only domains ending in .local are queried to the multicast group.

Responder

use SharkyDog\mDNS;

$mdnsd = new mDNS\SimpleResponder;
$mdnsd->addRecordIPv4('my-local-pc.local', '192.168.1.123');
$mdnsd->start();

// Stopping will close the socket and discard queued replies.
//$mdnsd->stop();

It's a "SimpleResponder", because it will only respond to simple queries. Any record type can be added and the responder will answer with one record per message, matching query name to record name. On qtype "ANY", all records matching name will be sent, again one record per message. $cfbit is the "cache-flush bit" from RFC6762, SRV and TXT records created by addService() bellow will have the cache-flush bit set.

public function addRecordIPv4(string $name, string $addr, int $ttl=120, $cfbit=true);
public function addRecordIPv6(string $name, string $addr, int $ttl=120, $cfbit=true);
public function addRecord(React\Dns\Model\Record $record, $cfbit=false);
public function delRecord(string $name, int $type, $data=null): bool;
public function addReverseIPv4(string $addr, string $name, int $ttl=120);
public function delReverseIPv4(string $addr): bool;
public function enableRecord(string $name, int $type, $data=null, bool $enable=true);

Type is one of React\Dns\Model\Message::TYPE_ constants. Single call for deleting a record will delete one record and return true or false if not found. If there are multiple with the same name and type, to delete all run a loop until false is returned.

Service discovery responder

Basic service discovery

use SharkyDog\mDNS;

$mdnsd = new mDNS\SimpleResponder;
$mdnsd->addRecordIPv4('my-local-pc.local', '192.168.1.123');
$mdnsd->addService('_testsvc1._tcp', 'instance1', -1, 'my-local-pc.local', 23456, 'aa','bb','cc');

$mdnsd->start();

The addService() is the key point.

public function addService(string $type, string $instance, ?int $ttl=null, ?string $target=null, int $srvport=0, string ...$txts);
public function delService(string $type, string $instance, bool $srv=true, bool $txt=true);
public function enableService(string $type, string $instance, bool $enable=true);
public function advertiseService(string $type, string $instance, ?int $ttl=null);

$type and $instance form the service instance1._testsvc1._tcp.local
$ttl (default 120) will be used for all records (PTR, SRV and TXT)
If $target is supplied, automatic SRV and TXT records will be created
- SRV will have priority=0, weight=0, port=$srvport and target=$target
- TXT will be empty if $txts array is empty
No automatic SRV and TXT records will be created if those already exist for the service (instance1._testsvc1._tcp.local)
- Use addRecord() before addService()
An automatic PTR will be added for _services._dns-sd._udp.local pointing to the new service type (_testsvc1._tcp.local)
- Same as above, if it does not already exist
A and AAAA records can not be auto created

advertiseService() when called will send once all records related to that service instance.

This service discovery still suffers from the same limitation of the SimpleResponder class mentioned above. One answer per message, but additional SRV, TXT, A and AAAA records will be returned. If the reply grows too large, additional records will be sent in separate messages, but only for multicast replies. In unicast replies only the record matched with the query will be sent, additional records will be removed if they do not fit in a single message.

RecordFactory class

New class (SharkyDog\mDNS\RecordFactory) to help create records and validate some parameters. IPv4 and IPv6 addresses are not yet checked thought.

use SharkyDog\mDNS;

$rfy = new mDNS\RecordFactory;
$mdnsd = new mDNS\SimpleResponder;

$mdnsd->addRecord($rfy->A('my-router.local', '192.168.1.1'));
$mdnsd->addRecord($rfy->A('my-pc.local', '192.168.1.2'));
$mdnsd->addRecord($rfy->TXT('sometxt-my-pc.local', 120, 'txt1','txt2','...'));

Multiple messages resolver

React resolver will use the first received message, which is proper for DNS, but in mDNS world multiple hosts can answer a query. To return answers from multiple messages, some extensions to SharkyDog\mDNS\React\Resolver and executors need to be made.

A new parameter is added to resolveAll

public function resolveAll($domain, $type, bool $multi=false);

When $multi is true, the timeout will be turned into time to collect messages. So, no timeout error will be thrown, response will be returned after timeout have passed and if no valid message was received in that time, React will throw NOERROR / NODATA error.

If the resolver was created with $dnsResolver parameter, $multi will be set to false for all domains except .local.

Let's see how many web servers in our network will respond in 2 seconds.

use SharkyDog\mDNS;
use React\Dns\Model\Message;

$resolver = new mDNS\React\Resolver(2);
$resolver->resolveAll('_http._tcp.local', Message::TYPE_PTR, true)->then(
  function($data) {
    print_r(array_unique($data));
  },
  function(\Exception $e) {
    print "Error: ".$e->getMessage()."\n";
  }
);

This will return an array of PTRs (targets).

Array
(
    [0] => shellyplus1pm-xxxxxxxxxxxx._http._tcp.local
    [1] => shellyem-xxxxxxxxxxxx._http._tcp.local
    [2] => shellyplus2pm-xxxxxxxxxxxx._http._tcp.local
)

These are service instance names, like instance1._testsvc1._tcp.local from the Service discovery responder example above. Only queried record types (in this case PTRs) should be returned as additional section is not processed.

Now, let's find all service types advertised on the local network.

use SharkyDog\mDNS;
use React\Dns\Model\Message;

$resolver = new mDNS\React\Resolver(2);
$resolver->resolveAll('_services._dns-sd._udp.local', Message::TYPE_PTR, true)->then(
  function($data) {
    print_r(array_unique($data));
  },
  function(\Exception $e) {
    print "Error: ".$e->getMessage()."\n";
  }
);

Should return

Array
(
    [0] => _nut._tcp.local
    [1] => _smb._tcp.local
    [2] => _testsvc._tcp.local
    [3] => _esphomelib._tcp.local
    [4] => _http._tcp.local
    [5] => _shelly._tcp.local
    [6] => _androidtvremote2._tcp.local
    [7] => _googlecast._tcp.local
)

Probably many more.

Additional records

public function resolveAll($domain, $type, bool $multi=false, bool $additional=false);

Off by default as this can increase the size of the response significantly and it changes the structure of the response array a little.

use SharkyDog\mDNS;
use React\Dns\Model\Message;

$resolver = new mDNS\React\Resolver(2);
$resolver->resolveAll('_http._tcp.local', Message::TYPE_PTR, false, true)->then(
  function($data) {
    $additional = isset($data['additional']) ? array_pop($data) : null;
    print_r(array_unique($data));
    print_r($additional);
  },
  function(\Exception $e) {
    print "Error: ".$e->getMessage()."\n";
  }
);

The additional records are put in additional element of the response array and will always be the last one. Each element in this array is a React\Dns\Model\Record object.

For service discovery, most devices respond on query for _svctype._tcp.local and _services._dns-sd._udp.local with a PTR for an instance of that service in answers section and SRV, TXT, A and AAAA in additional section.

Any records in answers section of the DNS message that do not match the name in the query will be moved to additional.

Responder (`SharkyDog\mDNS\SimpleResponder`).

Replies to queries for PTR or SRV will add additional records that exist in the responder, added via addRecordIPv4(), addRecordIPv6(), addRecord() or addService().

Any records a PTR is pointing to.
The target of a SRV (an A, AAAA or both).

If the response becomes too big, the additional records will be removed for unicast replies and sent in separate messages for multicast replies. Default message size is 1472 bytes, can be changed with SharkyDog\mDNS\Socket::setPacketSize(). Minimum is 12 bytes (dns message header), maximum is unbound.

public static function setPacketSize(int $size);

Message filter for the resolver

This is a callback that can filter out DNS messages before they are handled by the resolver. The purpose of this filter is to remove unwanted records in multi mode ($multi == true) or to select the exact record in single mode ($multi == false) instead of the first received. This also reflects on what additional records will be included as nothing is used from filtered out messages.

Only messages that have an answer matching query name and type will reach the filter.

Find a specific http server.

use SharkyDog\mDNS;
use React\Dns\Model\Message;

$filter = function(Message $message, string $addr) {
  print "Message from ".$addr."\n";

  foreach($message->answers as $record) {
    if($record->type != Message::TYPE_PTR) {
      continue;
    }
    if($record->data == 'shellyem-xxxxxxxxxxxx._http._tcp.local') {
      return true;
    }
  }

  return false;
};

$resolver = new mDNS\React\Resolver(2);
$resolver->setMDnsFilter($filter);

$resolver->resolveAll('_http._tcp.local', Message::TYPE_PTR, false, true)->then(
  function($data) {
    $additional = isset($data['additional']) ? array_pop($data) : null;
    print_r(array_unique($data));
    print_r($additional);
  },
  function(\Exception $e) {
    print "Error: ".$e->getMessage()."\n";
  }
);

From v1.5 filter can receive the query too (React\Dns\Query\Query).

use React\Dns\Model\Message;
use React\Dns\Query\Query;

$filter = function(Message $message, string $addr, Query $query) {
  // some code here
};

The filter can:

return false - skip this message
return true - stop processing messages and resolve the query with whatever was received so far
return Message - stop and resolve with returned message, other messages received before in multi mode will be discarded
throw exception - reject the query

Per query filter

The filter above will be used for all queries. From v1.5 a filter can be set only for the next query. First the global filter will be called then if it doesn't return anything (or returns null) and doesn't throw exception, the per query filter will be called. Parameters are the same, return meaning too.

// set filter for all queries
$resolver->setMDnsFilter($filter_all);
// set filter for next query
$resolver->setMDnsQueryFilter($filter_query1);
// $filter_all, then $filter_query1
$resolver->resolve($domain1);
// only $filter_all
$resolver->resolve($domain2);

Discoverer

New class for service discovery.

use SharkyDog\mDNS;
use SharkyDog\mDNS\Discoverer\Service;

$discoverer = new mDNS\SimpleDiscoverer;

// get all web servers that advertise themselves through mDNS
$discoverer->service('_http._tcp.local')->then(
  function($services) {
    foreach($services as $service) {
      $address = $service->target[0];
      print "Service ".$service->name;
      print " on ".$address->address.":".$service->port."\n";
    }
  },
  function(\Throwable $e) {
    print "Error: [".get_class($e)."] ".$e->getMessage()."\n";
  }
);

The SimpleDiscoverer->service() method resolves a given service type (_http._tcp.local), a service instance (server1._http._tcp.local) or the reserved name for all services (_services._dns-sd._udp.local) to an array of SharkyDog\mDNS\Discoverer\Service objects. It will throw an exception on any other name, like some-host.local.

First, the PTR record for the service type is resolved to service instances or other service types in case of _services._dns-sd._udp.local. Then the SRV records for every instance, then A and/or AAAA for the target from the SRV, then the TXT records for every instance.

A service instance will be discarded if no IP address is found for it. The resolved addresses will be in Service->target property as an array of SharkyDog\mDNS\Discoverer\Address objects. IP type (IPv4 or IPv6) can be found in Address->type property: React\Dns\Model\Message::TYPE_A or React\Dns\Model\Message::TYPE_AAAA.

An important thing to note is when this is used with a service type, including the reserved one for all services, the resolving will stop only after the full timeout of the Resolver has passed (default 2s). Results will be returned only after that. This can be changed with the message filter (see above) and the service filter (bellow). A per query message filter can not be used here.

Used with service instance, will resolve without waiting the timeout if SRV and ip addresses were found.

The service() method has few more parameters.

public function service(
  string $name,
  bool $ip4=true,
  bool $ip6=false,
  bool $txt=false,
  array &$addrr=[]
): React\Promise\PromiseInterface;

$ip4 and $ip6 control what addresses will be resolved. If both are false, $ip4 will be set to true.
$txt control if the TXT record will be queried.
$addrr is and array which will be filled with all additional records in the DNS messages. It can then be passed to another service() call and any records in it will be used instead of making new queries for them. Many devices return SRV, TXT, A and AAAA additional records in response to a PTR query for their service type.

Service filter

This filter applies to the next service() call, after which it will need to be set again if needed.

Returning false will discard the service, but the resolver will continue until timeout. Returning true will stop listening and resolve the promise with the received services.

use SharkyDog\mDNS;
use SharkyDog\mDNS\Discoverer\Service;

// use with custom resolver and change default timeout
$resolver = new mDNS\React\Resolver(5);
$discoverer = new mDNS\SimpleDiscoverer($resolver);

// will discard all services not on port 80
// and stop resolver on two received services
$discoverer->filter(function(Service $service) {
  static $counter = 0;

  if($service->port != 80) {
    return false;
  }

  if(++$counter == 2) {
    return true;
  }
});

// ask for all services on the network
// resolve IPv4, not IPv6
// ask for TXTs if not already in additional from PTRs
$discoverer->service('_services._dns-sd._udp.local',true,false,true)->then(
  function($services) {
    foreach($services as $service) {
      $address = $service->target[0];
      print "Service ".$service->name;
      print " on ".$address->address.":".$service->port."\n";
    }
  },
  function(\Throwable $e) {
    print "Error: [".get_class($e)."] ".$e->getMessage()."\n";
  }
);

What is my local IP?

This class was made mostly for fun, but could be useful if for some reason your too many Raspberry Pis do not keep a static ip address. A query will be sent for IPv4 address and a special domain _my_lan_ip._test.local (can be changed) to the mDNS group. If there is a responder, it will reply with the source ip address.

// Responder
namespace SharkyDog\mDNS;

// start
mDNS\WhatIsMyIP::startResponderIPv4();
// stop
mDNS\WhatIsMyIP::stopResponderIPv4();

// start, but only answer if the source ip is in this network
// 192.168.1.1 - 192.168.1.62
mDNS\WhatIsMyIP::startResponderIPv4('192.168.1.0/26');

// Resolver
namespace SharkyDog\mDNS;

// $resolver is optional, use to change timeout
$resolver = new mDNS\React\Resolver(2);
// Accept a reply only if it comes from this network, also optional
// 192.168.1.1 - 192.168.1.254
$promise = mDNS\WhatIsMyIP::resolveIPv4('192.168.1.0/24',$resolver);

// Will add the found IP to this mDNS Responder
$mdnsd = new mDNS\SimpleResponder;

$promise->then(
  function($ip) use($mdnsd) {
    print "My IP is ".$ip."\n";
    $mdnsd->addRecordIPv4('my-local-pc.local', $ip);
  },
  function(\Exception $e) {
    print "Error: [".get_class($e)."] ".$e->getMessage()."\n";
  }
);

sharkydog / mdns

Maintainers

Details

README

Resolver

Responder

Service discovery responder

RecordFactory class

Multiple messages resolver

Additional records

Responder (`SharkyDog\mDNS\SimpleResponder`).

Message filter for the resolver

Per query filter

Discoverer

Service filter

What is my local IP?

sharkydog / mdns

Maintainers

Details

README

Resolver

Responder

Service discovery responder

RecordFactory class

Multiple messages resolver

Additional records

Responder (SharkyDog\mDNS\SimpleResponder).

Message filter for the resolver

Per query filter

Discoverer

Service filter

What is my local IP?

Responder (`SharkyDog\mDNS\SimpleResponder`).