nerdmann/react-phenocean

Enocean stream for ReactPHP

dev-master 2019-08-18 16:02 UTC

Requires

• php: >=7.2
• react/filesystem: ~0.1
• react/socket: ~1.2
• react/stream: ~1.1

MIT

• reactor
• asynchronous
• reactphp
• iot
• enocean

README

This is an streamer for ReactPHP for Enocean devices. You need any kind of gateway (like USB300) to talk to enocean devices.

Supported devices

All devices provides one (or more) EnOcean Equipment Profile (EEP). More information about EEPs can be found here.

Until now this lib supports the following EEP:

EEP	Tested devices
A5-12-01	Eltako FSVA-230V
D2-01-??	D2-01-12: NodOn Relay Switch
F6-02-02	NodOn Soft Remote, Eltako FSM14-UC

Example

Create a ReactPHP loop and a new EnoceanStream. The first parameter is the device file forthe gateway.

$loop = Factory::create();
$stream = new nerdmann\react\phenocean\EnoceanStream("/dev/enocean", $loop);

Then create all your devices, that you want to use.

$relay = DeviceFactory::create(
  array(0xD2, 0x01, 0x12),       // The EEP of the device
  array(0xDE, 0xAD, 0xBE, 0xEF), // The ID of the device
  $stream,                       // The Enocean Stream
  $loop                          // The loop
);

$rocker = DeviceFactory::create(
  array(0xF6, 0x02, 0x02),       // The EEP of the device
  array(0xDE, 0xCA, 0xFB, 0xAD), // The ID of the device
  $stream,                       // The Enocean Stream
  $loop                          // The loop
);

Now you can connect these 2 devices or do whatever you want to do. The devices will trigger "event" events. The NodOn switch has 2 relay (0x00 and 0x01). They can be activated (0x64, which means 100%) or deactivated (0x00 or 0%). If you have a device that can dim, you can also send value between 0x00 and 0x64.

$rocker->on("event", function (Event $event) use ($relay) {
    if ($event->getProperty("pressed1")) {
        switch ($event->getProperty("rocker1")) {
            case 0: $relay->setActuator(0x00, 0x64); break;
            case 1: $relay->setActuator(0x00, 0x00); break;
            case 2: $relay->setActuator(0x01, 0x64); break;
            case 3: $relay->setActuator(0x01, 0x00); break;
        }
    }
});

... Don't forget to run the loop

$loop->run();