ipgeolocation/ipgeolocation-php-sdk

Ipgeolocation provides a set of APIs to make ip based decisions.

Maintainers

Details

github.com/IPGeolocation/ip-geolocation-api-php

Homepage

Source

Issues

Installs: 0

Dependents: 0

Suggesters: 0

Security: 0

Stars: 32

Watchers: 6

Forks: 21

Open Issues: 2

2.0.0 2025-07-03 11:41 UTC

Requires

Requires (Dev)

Apache-2.0 e9c5f6eaedbeea48ba93706777dcfd2eeec1b17b

phprestapigeolocationsdkIP-Toolsipgeolocation

This package is not auto-updated.

Last update: 2025-07-04 10:06:43 UTC

README

IPGeolocation provides a set of APIs to make IP-based decisions and enrich your applications with real-time geolocation, timezone, user-agent, and threat intelligence data.

API version: 2.0

Table of Contents

Installation

Using Composer

It is recommended to install the SDK using Composer:

composer require ipgeolocation/ipgeolocation-php-sdk

If you want to include a local development version:

composer install

Manual Installation

If you wish to manually include the SDK without Composer:

  1. Clone this repository

  2. Include the autoload.php from the vendor folder:

require_once('/path/to/vendor/autoload.php');
  1. Ensure dependencies in vendor/ are installed via:
composer install

Requirements

  • PHP 8.1 or higher

  • Composer

  • Guzzle (installed automatically via Composer)

Authentication Setup

To authenticate API requests, you will need an API key from ipgeolocation.io. Once obtained, configure the SDK like this:

require_once(__DIR__ . '/vendor/autoload.php');

$config = Ipgeolocation\Sdk\Configuration::getDefaultConfiguration()
    ->setApiKey('apiKey', 'YOUR_API_KEY_HERE');

Security Tip:
Do not hardcode your API keys in code that is committed to public repositories.
Consider using environment variables or a secure vault instead.

API Endpoints

All URIs are relative to https://api.ipgeolocation.io/v2

Class Method HTTP request Description
ASNLookupAPI getAsnInfo GET /asn Get details of any ASN number or associated IP address
AbuseContactAPI getAbuseContactInfo GET /abuse Retrieve abuse reporting contact information for a given IP address
AstronomyAPI getAstronomyDetails GET /astronomy Get sunrise, sunset, moonrise, moonset, and related data for a location
IPGeolocationAPI getBulkIpGeolocation POST /ipgeo-bulk Get geolocation data for multiple IP addresses in a single API request
IPGeolocationAPI getIpGeolocation GET /ipgeo Get geolocation data for a single IP address
IPSecurityAPI getBulkIpSecurityInfo POST /security-bulk Retrieve security threat intelligence for multiple IPs
IPSecurityAPI getIpSecurityInfo GET /security Retrieve security information (VPN, TOR, proxy, etc.) for a single IP
TimeConversionAPI convertTimeBetweenTimezones GET /timezone/convert Convert time between two specified timezones
TimezoneAPI getTimezoneInfo GET /timezone Timezone information details
UserAgentAPI getUserAgentDetails GET /user-agent Get details of user-agent
UserAgentAPI parseBulkUserAgentStrings POST /user-agent-bulk Handle multiple user-agent string lookups
UserAgentAPI parseUserAgentString POST /user-agent Handle single User-Agent string

Example Usage

IP Geolocation Examples

This section shows how to use the getIpGeolocation method from the PHP SDK across Free, Standard, and Advanced subscription tiers. Each example highlights different parameter combinations: fields, include, and excludes.

Parameters

  • fields
    Use this parameter to include specific fields in the response.

  • excludes
    Use this parameter to omit specific fields from the response.

  • include
    Use this parameter to add optional modules to the response, such as:

    • security
    • user_agent
    • hostname
    • liveHostname
    • hostnameFallbackLive
    • abuse
    • dma
    • timezone

For the full list of supported fields and modules, please refer to the official IP Geolocation API Documentation.

The ip parameter in the SDK can accept any valid IPv4 address, IPv6 address, or domain name. If the ip parameter is not specified, the API will return information about the public IP of the machine where the SDK is running.

Basic Plan Examples

Default Fields

require_once(__DIR__ . '/vendor/autoload.php');

$config = \Ipgeolocation\Sdk\Configuration::getDefaultConfiguration()
    ->setApiKey('apiKey', 'YOUR_API_KEY');

$apiInstance = new \Ipgeolocation\Sdk\Api\IPGeolocationAPI(
    new GuzzleHttp\Client(),
    $config
);

try {
    $response = $apiInstance->getIpGeolocation(
        "8.8.8.8",  // IP
        null,       // lang
        null,       // fields
        null,       // excludes
        null,       // include
        null      // output
    );

    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling IPGeolocationAPI->getIpGeolocation: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "ip": "8.8.8.8",
    "location": {
        "continent_code": "NA",
        "continent_name": "North America",
        "country_code2": "US",
        "country_code3": "USA",
        "country_name": "United States",
        "country_name_official": "United States of America",
        "country_capital": "Washington, D.C.",
        "state_prov": "California",
        "state_code": "US-CA",
        "district": "Santa Clara",
        "city": "Mountain View",
        "zipcode": "94043-1351",
        "latitude": "37.42240",
        "longitude": "-122.08421",
        "is_eu": false,
        "country_flag": "https://ipgeolocation.io/static/flags/us_64.png",
        "geoname_id": "6301403",
        "country_emoji": "🇺🇸"
    },
    "country_metadata": {
        "calling_code": "+1",
        "tld": ".us",
        "languages": [
            "en-US",
            "es-US",
            "haw",
            "fr"
        ]
    },
    "currency": {
        "code": "USD",
        "name": "US Dollar",
        "symbol": "$"
    }
}

Filtering Specific Fields from the Response

Use the fields and excludes parameters:

try {
    $response = $apiInstance->getIpGeolocation(
        "8.8.4.4",                                     // IP
        null,                                          // lang
        "location",                                    // fields
        "location.continent_code,location.continent_name", // excludes
        null,                                          // include
        null                                         // output
    );

    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling IPGeolocationAPI->getIpGeolocation: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "ip": "8.8.4.4",
    "location": {
        "country_code2": "US",
        "country_code3": "USA",
        "country_name": "United States",
        "country_name_official": "United States of America",
        "country_capital": "Washington, D.C.",
        "state_prov": "California",
        "state_code": "US-CA",
        "district": "Santa Clara",
        "city": "Mountain View",
        "zipcode": "94043-1351",
        "latitude": "37.42240",
        "longitude": "-122.08421",
        "is_eu": false,
        "country_flag": "https://ipgeolocation.io/static/flags/us_64.png",
        "geoname_id": "6301403",
        "country_emoji": "🇺🇸"
    }
}

2️⃣ Standard Plan Examples

Default Fields

require_once(__DIR__ . '/vendor/autoload.php');

$config = \Ipgeolocation\Sdk\Configuration::getDefaultConfiguration()
    ->setApiKey('apiKey', 'YOUR_API_KEY');

$apiInstance = new \Ipgeolocation\Sdk\Api\IPGeolocationAPI(
    new GuzzleHttp\Client(),
    $config
);

try {
    $response = $apiInstance->getIpGeolocation(
        "8.8.8.8",  // IP
        null,       // lang
        null,       // fields
        null,       // excludes
        null,       // include
        null      // output
    );

    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling IPGeolocationAPI->getIpGeolocation: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "ip": "8.8.8.8",
    "location": {
        "continent_code": "NA",
        "continent_name": "North America",
        "country_code2": "US",
        "country_code3": "USA",
        "country_name": "United States",
        "country_name_official": "United States of America",
        "country_capital": "Washington, D.C.",
        "state_prov": "California",
        "state_code": "US-CA",
        "district": "Santa Clara",
        "city": "Mountain View",
        "zipcode": "94043-1351",
        "latitude": "37.42240",
        "longitude": "-122.08421",
        "is_eu": false,
        "country_flag": "https://ipgeolocation.io/static/flags/us_64.png",
        "geoname_id": "6301403",
        "country_emoji": "🇺🇸"
    },
    "country_metadata": {
        "calling_code": "+1",
        "tld": ".us",
        "languages": [
            "en-US",
            "es-US",
            "haw",
            "fr"
        ]
    },
    "network": {
        "asn": {
            "as_number": "AS15169",
            "organization": "Google LLC",
            "country": "US"
        },
        "company": {
            "name": "Google LLC"
        }
    },
    "currency": {
        "code": "USD",
        "name": "US Dollar",
        "symbol": "$"
    }
}

Retrieving Geolocation Data in Multiple Languages

Here is an example to get the geolocation data for IP address '2001:4230:4890::1' in French language:

try {
    $response = $apiInstance->getIpGeolocation(
        "2001:4230:4890::1",  // IP
        "fr",                 // lang
        null,                 // fields
        null,                 // excludes
        null,                 // include
        null                // output
    );

    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling IPGeolocationAPI->getIpGeolocation: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "ip": "2001:4230:4890:0:0:0:0:1",
    "location": {
        "continent_code": "AF",
        "continent_name": "Afrique",
        "country_code2": "MU",
        "country_code3": "MUS",
        "country_name": "Maurice",
        "country_name_official": "",
        "country_capital": "Port Louis",
        "state_prov": "Wilhems des plaines",
        "state_code": "MU-PW",
        "district": "Quatre Bornes",
        "city": "Quatre Bornes",
        "zipcode": "72201",
        "latitude": "-20.24304",
        "longitude": "57.49631",
        "is_eu": false,
        "country_flag": "https://ipgeolocation.io/static/flags/mu_64.png",
        "geoname_id": "1106777",
        "country_emoji": "🇲🇺"
    },
    "country_metadata": {
        "calling_code": "+230",
        "tld": ".mu",
        "languages": [
            "en-MU",
            "bho",
            "fr"
        ]
    },
    "network": {
        "asn": {
            "as_number": "AS0",
            "organization": "",
            "country": ""
        },
        "company": {
            "name": "African Network Information Center AfriNIC Ltd"
        }
    },
    "currency": {
        "code": "MUR",
        "name": "Mauritius Rupee",
        "symbol": "₨"
    }
}

Include Hostname, Timezone and User-Agent

try {
    $response = $apiInstance->getIpGeolocation(
        "4.5.6.7",                                             // IP
        null,                                                  // lang
        "location.country_name,location.country_capital",      // fields
        null,                                                  // excludes
        "user_agent,time_zone,hostnameFallbackLive",           // include
        null                                                 // output
    );

    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling IPGeolocationAPI->getIpGeolocation: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "ip": "4.5.6.7",
    "hostname": "4.5.6.7",
    "location": {
        "country_name": "United States",
        "country_capital": "Washington, D.C."
    },
    "time_zone": {
        "name": "America/Chicago",
        "offset": -6,
        "offset_with_dst": -5,
        "current_time": "2025-07-01 06:13:11.646-0500",
        "current_time_unix": 1751368391.646,
        "is_dst": true,
        "dst_savings": 1,
        "dst_exists": true,
        "dst_start": {
            "utc_time": "2025-03-09 TIME 08",
            "duration": "+1H",
            "gap": true,
            "date_time_after": "2025-03-09 TIME 03",
            "date_time_before": "2025-03-09 TIME 02",
            "overlap": false
        },
        "dst_end": {
            "utc_time": "2025-11-02 TIME 07",
            "duration": "-1H",
            "gap": false,
            "date_time_after": "2025-11-02 TIME 01",
            "date_time_before": "2025-11-02 TIME 02",
            "overlap": true
        }
    },
    "user_agent": {
        "user_agent_string": "Ipgeolocation-SDK/2.0.0/PHP",
        "name": "PHP",
        "type": "Robot",
        "version": "??",
        "version_major": "??",
        "device": {
            "name": "PHP",
            "type": "Robot",
            "brand": "PHP",
            "cpu": "Unknown"
        },
        "engine": {
            "name": "PHP",
            "type": "Robot",
            "version": "??",
            "version_major": "??"
        },
        "operating_system": {
            "name": "Cloud",
            "type": "Cloud",
            "version": "??",
            "version_major": "??",
            "build": "??"
        }
    }
}

Note on Hostname Parameters:

The IP Geolocation API supports hostname lookup for all paid subscriptions. However, this is not included by default. To enable hostname resolution, use the include parameter with one of the following options:

  • hostname: Performs a quick lookup using the internal hostname database. If no match is found, the IP is returned as-is. This is fast but may produce incomplete results.
  • liveHostname: Queries live sources for accurate hostname resolution. This may increase response time.
  • hostnameFallbackLive: Attempts the internal database first, and falls back to live sources if no result is found. This option provides a balance of speed and reliability.

Advanced Plan Examples

Include DMA, Abuse, and Security

try {
    $response = $apiInstance->getIpGeolocation(
        "8.8.8.8",                                             // IP
        null,                                                  // lang
        null,                                                  // fields
        "location.country_flag,location.country_emoji",        // excludes
        "dma,abuse,security",                                  // include
        null                                                   // output
    );

    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling IPGeolocationAPI->getIpGeolocation: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "ip": "8.8.8.8",
    "location": {
        "continent_code": "NA",
        "continent_name": "North America",
        "country_code2": "US",
        "country_code3": "USA",
        "country_name": "United States",
        "country_name_official": "United States of America",
        "country_capital": "Washington, D.C.",
        "state_prov": "California",
        "state_code": "US-CA",
        "district": "Santa Clara",
        "city": "Mountain View",
        "zipcode": "94043-1351",
        "latitude": "37.42240",
        "longitude": "-122.08421",
        "is_eu": false,
        "geoname_id": "6301403",
        "accuracy_radius": "",
        "locality": "Mountain View",
        "dma_code": "807"
    },
    "country_metadata": {
        "calling_code": "+1",
        "tld": ".us",
        "languages": [
            "en-US",
            "es-US",
            "haw",
            "fr"
        ]
    },
    "network": {
        "asn": {
            "as_number": "AS15169",
            "organization": "Google LLC",
            "country": "US",
            "asn_name": "GOOGLE",
            "type": "BUSINESS",
            "domain": "about.google",
            "date_allocated": "",
            "allocation_status": "assigned",
            "num_of_ipv4_routes": "983",
            "num_of_ipv6_routes": "104",
            "rir": "ARIN"
        },
        "connection_type": "",
        "company": {
            "name": "Google LLC",
            "type": "Business",
            "domain": "googlellc.com"
        }
    },
    "currency": {
        "code": "USD",
        "name": "US Dollar",
        "symbol": "$"
    },
    "security": {
        "threat_score": 0,
        "is_tor": false,
        "is_proxy": false,
        "proxy_type": "",
        "proxy_provider": "",
        "is_anonymous": false,
        "is_known_attacker": false,
        "is_spam": false,
        "is_bot": false,
        "is_cloud_provider": false,
        "cloud_provider": ""
    },
    "abuse": {
        "route": "8.8.8.0/24",
        "country": "",
        "handle": "ABUSE5250-ARIN",
        "name": "Abuse",
        "organization": "Abuse",
        "role": "abuse",
        "kind": "group",
        "address": "1600 Amphitheatre Parkway\nMountain View\nCA\n94043\nUnited States",
        "emails": [
            "network-abuse@google.com"
        ],
        "phone_numbers": [
            "+1-650-253-0000"
        ]
    }
}

These examples demonstrate typical usage of the IP Geolocation API with different subscription tiers. Use fields to specify exactly which data to receive, include for optional data like security and user agent, and excludes to omit specific keys from the response.

Note: All features available in the Free plan are also included in the Standard and Advanced plans. Similarly, all features of the Standard plan are available in the Advanced plan.

Bulk IP Geolocation Example

The SDK supports bulk IP geolocation requests using the getBulkIpGeolocation() method.
All parameters like fields, include, and excludes can be used in bulk requests.

require_once(__DIR__ . '/vendor/autoload.php');

$config = \Ipgeolocation\Sdk\Configuration::getDefaultConfiguration()
    ->setApiKey('apiKey', 'YOUR_API_KEY');

$apiInstance = new \Ipgeolocation\Sdk\Api\IPGeolocationAPI(
    new \GuzzleHttp\Client(),
    $config
);

$bulkRequest = new \Ipgeolocation\Sdk\Model\BulkIPRequest([
    'ips' => ["8.8.8.8", "1.1.1.1"]
]);

try {
    $response = $apiInstance->getBulkIpGeolocation(
        $bulkRequest,
        null,                                                   // lang
        "location.country_name,location.city",                  // fields
        "location.continent_code",                              // excludes
        "security,timezone",                                    // include
        null                                                  // output
    );

    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling IPGeolocationAPI->getBulkIpGeolocation: ', $e->getMessage(), PHP_EOL;
}

IP Security Examples

This section shows how to use the getIpSecurityInfo() method with various subscription tiers. Each example demonstrates how to query threat intelligence and risk metadata using parameters like fields, excludes, and include.

For the full API specs, refer to IP Security API Documentation.

1️⃣ Basic Request (Minimal Setup)

require_once(__DIR__ . '/vendor/autoload.php');

$config = \Ipgeolocation\Sdk\Configuration::getDefaultConfiguration()
    ->setApiKey('apiKey', 'YOUR_API_KEY');

$apiInstance = new \Ipgeolocation\Sdk\Api\IPSecurityAPI(
    new \GuzzleHttp\Client(),
    $config
);

try {
    $response = $apiInstance->getIpSecurityInfo(
        "2.56.188.34",  // ip
        null,           // include
        null,           // fields
        null,           // excludes
        null,           // output
        null            // lang
    );

    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo "API call failed: {$e->getMessage()}";
}

Sample Response:

{
    "ip": "2.56.188.34",
    "security": {
        "threat_score": 80,
        "is_tor": false,
        "is_proxy": true,
        "proxy_type": "VPN",
        "proxy_provider": "Nord VPN",
        "is_anonymous": true,
        "is_known_attacker": true,
        "is_spam": false,
        "is_bot": false,
        "is_cloud_provider": true,
        "cloud_provider": "Packethub S.A."
    }
}

Include Multiple Optional Fields

try {
    $response = $apiInstance->getIpSecurityInfo(
        "2.56.188.34",                                 // ip
        "location,network,currency,time_zone,user_agent,country_metadata,hostname", // include
        null,                                          // fields
        null,                                          // excludes
        null,                                          // output
        null                                           // lang
    );

    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo "API call failed: {$e->getMessage()}";
}

Sample Response:

{
    "ip": "2.56.188.34",
    "hostname": "2.56.188.34",
    "security": {
        "threat_score": 80,
        "is_tor": false,
        "is_proxy": true,
        "proxy_type": "VPN",
        "proxy_provider": "Nord VPN",
        "is_anonymous": true,
        "is_known_attacker": true,
        "is_spam": false,
        "is_bot": false,
        "is_cloud_provider": true,
        "cloud_provider": "Packethub S.A."
    },
    "location": {
        "continent_code": "NA",
        "continent_name": "North America",
        "country_code2": "US",
        "country_code3": "USA",
        "country_name": "United States",
        "country_name_official": "United States of America",
        "country_capital": "Washington, D.C.",
        "state_prov": "Texas",
        "state_code": "US-TX",
        "district": "Dallas County",
        "city": "Dallas",
        "zipcode": "75207",
        "latitude": "32.78916",
        "longitude": "-96.82170",
        "is_eu": false,
        "country_flag": "https://ipgeolocation.io/static/flags/us_64.png",
        "geoname_id": "7181768",
        "country_emoji": "🇺🇸"
    },
    "network": {
        "asn": {
            "as_number": "AS62240",
            "organization": "Clouvider Limited",
            "country": "GB"
        },
        "company": {
            "name": "Packethub S.A."
        }
    },
    "time_zone": {
        "name": "America/Chicago",
        "offset": -6,
        "offset_with_dst": -5,
        "current_time": "2025-07-02 05:04:04.337-0500",
        "current_time_unix": 1751450644.337,
        "is_dst": true,
        "dst_savings": 1,
        "dst_exists": true,
        "dst_start": {
            "utc_time": "2025-03-09 TIME 08",
            "duration": "+1H",
            "gap": true,
            "date_time_after": "2025-03-09 TIME 03",
            "date_time_before": "2025-03-09 TIME 02",
            "overlap": false
        },
        "dst_end": {
            "utc_time": "2025-11-02 TIME 07",
            "duration": "-1H",
            "gap": false,
            "date_time_after": "2025-11-02 TIME 01",
            "date_time_before": "2025-11-02 TIME 02",
            "overlap": true
        }
    },
    "user_agent": {
        "user_agent_string": "Ipgeolocation/2.0.0/PHP",
        "name": "PHP",
        "type": "Robot",
        "version": "??",
        "version_major": "??",
        "device": {
            "name": "PHP",
            "type": "Robot",
            "brand": "PHP",
            "cpu": "Unknown"
        },
        "engine": {
            "name": "PHP",
            "type": "Robot",
            "version": "??",
            "version_major": "??"
        },
        "operating_system": {
            "name": "Cloud",
            "type": "Cloud",
            "version": "??",
            "version_major": "??",
            "build": "??"
        }
    },
    "country_metadata": {
        "calling_code": "+1",
        "tld": ".us",
        "languages": [
            "en-US",
            "es-US",
            "haw",
            "fr"
        ]
    },
    "currency": {
        "code": "USD",
        "name": "US Dollar",
        "symbol": "$"
    }
}

Request with Field Filtering

try {
    $response = $apiInstance->getIpSecurityInfo(
        "195.154.221.54",  // ip
        null,              // include
        "security.is_tor,security.is_proxy,security.is_bot,security.is_spam",  // fields
        null,              // excludes
        null,              // output
        null               // lang
    );

    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo "API call failed: " . $e->getMessage();
}

Sample Response:

{
    "ip": "195.154.221.54",
    "security": {
        "is_tor": false,
        "is_proxy": true,
        "is_spam": false,
        "is_bot": false
    }
}

Bulk IP Security Lookup

The SDK also supports bulk IP Security requests using the getBulkIPSecurityInfo() method. All parameters like fields, include, and excludes can also be used in bulk requests.

$apiInstance = new \Ipgeolocation\Sdk\Api\IPSecurityAPI(
    new \GuzzleHttp\Client()
);

$bulkRequest = new \Ipgeolocation\Sdk\Model\BulkIPRequest([
            'ips' => ["2.56.188.34", "2.56.188.35"]
        ]);

try {
    $response = $apiInstance->getBulkIpSecurityInfo(
        $bulkRequest,                              // bulk request object
        "location,network",                        // include
        "security.threat_score,location.country_name", // fields
        null,                                      // excludes
        null,                                    // output
        null                                       // lang
    );

    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo "API call failed: " . $e->getMessage();
}

ASN API Examples

This section provides usage examples of the getAsnInfo() method from the SDK. These methods allow developers to retrieve detailed ASN-level network data either by ASN number or by IP address. Note that ASN API is only available in the Advanced subscription plans.

Refer to the ASN API documentation for a detailed list of supported fields and behaviors.

Get ASN Information by IP Address

<?php

require_once(__DIR__ . '/../vendor/autoload.php');

$client = new \GuzzleHttp\Client();
$config = \Ipgeolocation\Sdk\Configuration::getDefaultConfiguration()
    ->setApiKey('apiKey', 'YOUR_API_KEY');

$apiInstance = new \Ipgeolocation\Sdk\Api\TimezoneAPI($client, $config);

try {
    $response = $apiInstance->getTimezoneInfo(
        null,    // tz
        null,    // location
        null,    // lat
        null,    // long
        "8.8.8.8", // ip
        null,    // iata_code
        null,    // icao_code
        null,    // lo_code
        null,    // output
        null     // lang
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling TimezoneAPI->getTimezoneInfo: ', $e->getMessage(), PHP_EOL;
}

Sample Response

{
    "ip": "8.8.8.8",
    "asn": {
        "as_number": "AS15169",
        "organization": "Google LLC",
        "country": "US",
        "asn_name": "GOOGLE",
        "type": "BUSINESS",
        "domain": "about.google",
        "date_allocated": "",
        "allocation_status": "assigned",
        "num_of_ipv4_routes": 983,
        "num_of_ipv6_routes": 104,
        "rir": "ARIN"
    }
}

Get ASN Information by ASN Number

try {
    $response = $apiInstance->getAsnInfo(
        null,         // ip
        15169,        // asn
        null,         // include
        null,         // excludes
        null          // fields
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling ASNLookupAPI->getAsnInfo: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "ip": "8.8.8.8",
    "asn": {
        "as_number": "AS15169",
        "organization": "Google LLC",
        "country": "US",
        "asn_name": "GOOGLE",
        "type": "BUSINESS",
        "domain": "about.google",
        "date_allocated": "",
        "allocation_status": "assigned",
        "num_of_ipv4_routes": 983,
        "num_of_ipv6_routes": 104,
        "rir": "ARIN"
    }
}

Combine All objects using Include

try {
    $response = $apiInstance->getAsnInfo(
        null,                                                // ip
        12,                                                  // asn
        'peers,downstreams,upstreams,routes,whois_response', // include
        null,                                                // excludes
        null                                                 // fields
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling ASNLookupAPI->getAsnInfo: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "asn": {
        "as_number": "AS12",
        "organization": "New York University",
        "country": "US",
        "asn_name": "NYU-DOMAIN",
        "type": "EDUCATION",
        "domain": "nyu.edu",
        "date_allocated": "",
        "allocation_status": "assigned",
        "num_of_ipv4_routes": 12,
        "num_of_ipv6_routes": 1,
        "rir": "ARIN",
        "routes": [
            "192.76.177.0/24",
            "216.165.96.0/20",
            "128.122.0.0/16",
            "216.165.88.0/24",
            "192.86.139.0/24",
            "216.165.103.0/24",
            "216.165.89.0/24",
            "216.165.0.0/18",
            "216.165.112.0/21",
            "2607:f600::/32",
            "216.165.64.0/19",
            "216.165.102.0/24",
            "216.165.120.0/22"
        ],
        "upstreams": [
            {
                "as_number": "AS3269",
                "description": "Telecom Italia S.p.A.",
                "country": "IT"
            },
            {
                "as_number": "AS8220",
                "description": "COLT Technology Services Group Limited",
                "country": "GB"
            },
            {
                "as_number": "AS286",
                "description": "GTT Communications Inc.",
                "country": "US"
            },
            {
                "as_number": "AS3257",
                "description": "GTT Communications Inc.",
                "country": "US"
            },
            {
                "as_number": "AS3754",
                "description": "NYSERNet",
                "country": "US"
            },
            {
                "as_number": "AS3356",
                "description": "Level 3 Parent, LLC",
                "country": "US"
            },
            {
                "as_number": "AS6461",
                "description": "Zayo Bandwidth",
                "country": "US"
            },
            {
                "as_number": "AS137",
                "description": "Consortium GARR",
                "country": "IT"
            }
        ],
        "downstreams": [
            {
                "as_number": "AS394666",
                "description": "NYU Langone Health",
                "country": "US"
            },
            {
                "as_number": "AS54965",
                "description": "Polytechnic Institute of NYU",
                "country": "US"
            }
        ],
        "peers": [
            {
                "as_number": "AS3269",
                "description": "Telecom Italia S.p.A.",
                "country": "IT"
            },
            {
                "as_number": "AS8220",
                "description": "COLT Technology Services Group Limited",
                "country": "GB"
            },
            {
                "as_number": "AS394666",
                "description": "NYU Langone Health",
                "country": "US"
            },
            {
                "as_number": "AS286",
                "description": "GTT Communications Inc.",
                "country": "NL"
            },
            {
                "as_number": "AS286",
                "description": "GTT Communications Inc.",
                "country": "US"
            },
            {
                "as_number": "AS3257",
                "description": "GTT Communications Inc.",
                "country": "US"
            },
            {
                "as_number": "AS3754",
                "description": "NYSERNet",
                "country": "US"
            },
            {
                "as_number": "AS3356",
                "description": "Level 3 Parent, LLC",
                "country": "US"
            },
            {
                "as_number": "AS6461",
                "description": "Zayo Bandwidth",
                "country": "US"
            },
            {
                "as_number": "AS137",
                "description": "Consortium GARR",
                "country": "IT"
            },
            {
                "as_number": "AS54965",
                "description": "Polytechnic Institute of NYU",
                "country": "US"
            }
        ],
        "whois_response": "\n#\n# ARIN WHOIS data and services are subject to the Terms of Use\n# available at: https://www.arin.net/resources/registry/whois/tou/\n#\n# If you see inaccuracies in the results, please report at\n# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/\n#\n# Copyright 1997-2025, American Registry for Internet Numbers, Ltd.\n#\n\n\nASNumber:       12\nASName:         NYU-DOMAIN\nASHandle:       AS12\nRegDate:        1984-07-05\nUpdated:        2023-05-25    \nRef:            https://rdap.arin.net/registry/autnum/12\n\n\nOrgName:        New York University\nOrgId:          NYU-Z\nAddress:        726 Broadway, 8th Floor - ITS\nCity:           New York\nStateProv:      NY\nPostalCode:     10003\nCountry:        US\nRegDate:        2023-05-15\nUpdated:        2023-05-15\nRef:            https://rdap.arin.net/registry/entity/NYU-Z\n\n\nOrgAbuseHandle: OIS9-ARIN\nOrgAbuseName:   Office of Information Security\nOrgAbusePhone:  +1-212-998-3333 \nOrgAbuseEmail:  abuse@nyu.edu\nOrgAbuseRef:    https://rdap.arin.net/registry/entity/OIS9-ARIN\n\nOrgNOCHandle: COSI-ARIN\nOrgNOCName:   Communications Operations Services - ITS\nOrgNOCPhone:  +1-212-998-3444 \nOrgNOCEmail:  noc-cosi-arin@nyu.edu\nOrgNOCRef:    https://rdap.arin.net/registry/entity/COSI-ARIN\n\nOrgTechHandle: COSI-ARIN\nOrgTechName:   Communications Operations Services - ITS\nOrgTechPhone:  +1-212-998-3444 \nOrgTechEmail:  noc-cosi-arin@nyu.edu\nOrgTechRef:    https://rdap.arin.net/registry/entity/COSI-ARIN\n\nRNOCHandle: COSI-ARIN\nRNOCName:   Communications Operations Services - ITS\nRNOCPhone:  +1-212-998-3444 \nRNOCEmail:  noc-cosi-arin@nyu.edu\nRNOCRef:    https://rdap.arin.net/registry/entity/COSI-ARIN\n\nRTechHandle: COSI-ARIN\nRTechName:   Communications Operations Services - ITS\nRTechPhone:  +1-212-998-3444 \nRTechEmail:  noc-cosi-arin@nyu.edu\nRTechRef:    https://rdap.arin.net/registry/entity/COSI-ARIN\n\n\n#\n# ARIN WHOIS data and services are subject to the Terms of Use\n# available at: https://www.arin.net/resources/registry/whois/tou/\n#\n# If you see inaccuracies in the results, please report at\n# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/\n#\n# Copyright 1997-2025, American Registry for Internet Numbers, Ltd.\n#\n"
    }
}

Timezone API Examples

This section provides usage examples of the getTimezoneInfo() method from the PHP SDK, showcasing how to fetch timezone and time-related data using different query types — IP address, latitude/longitude, timezone ID, IATA code, ICAO code, or UN/LOCODE.

For full API specifications, refer to the Timezone API documentation.

Get Timezone by IP Address

<?php

require_once(__DIR__ . '/../vendor/autoload.php');

$client = new \GuzzleHttp\Client();
$config = \Ipgeolocation\Sdk\Configuration::getDefaultConfiguration()
    ->setApiKey('apiKey', 'YOUR_API_KEY');

$apiInstance = new \Ipgeolocation\Sdk\Api\TimezoneAPI($client, $config);

try {
    $response = $apiInstance->getTimezoneInfo(
        null,    // tz
        null,    // location
        null,    // lat
        null,    // long
        "8.8.8.8", // ip
        null,    // iata_code
        null,    // icao_code
        null,    // lo_code
        null,    // output
        null     // lang
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling TimezoneAPI->getTimezoneInfo: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "ip": "8.8.8.8",
    "location": {
        "continent_code": "NA",
        "continent_name": "North America",
        "country_code2": "US",
        "country_code3": "USA",
        "country_name": "United States",
        "country_name_official": "United States of America",
        "is_eu": false,
        "state_prov": "California",
        "state_code": "US-CA",
        "district": "Santa Clara",
        "city": "Mountain View",
        "zipcode": "94043-1351",
        "latitude": "37.42240",
        "longitude": "-122.08421"
    },
    "time_zone": {
        "name": "America/Los_Angeles",
        "offset": -8,
        "offset_with_dst": -7,
        "date": "2025-07-02",
        "date_time": "2025-07-02 05:05:16",
        "date_time_txt": "Wednesday, July 02, 2025 05:05:16",
        "date_time_wti": "Wed, 02 Jul 2025 05:05:16 -0700",
        "date_time_ymd": "2025-07-02T05:05:16-07:00",
        "date_time_unix": 1751457916.876,
        "time_24": "05:05:16",
        "time_12": "05:05:16 AM",
        "week": 27,
        "month": 7,
        "year": 2025,
        "year_abbr": "25",
        "is_dst": true,
        "dst_savings": 1,
        "dst_exists": true,
        "dst_start": {
            "utc_time": "2025-03-09 TIME 10",
            "duration": "+1H",
            "gap": true,
            "date_time_after": "2025-03-09 TIME 03",
            "date_time_before": "2025-03-09 TIME 02",
            "overlap": false
        },
        "dst_end": {
            "utc_time": "2025-11-02 TIME 09",
            "duration": "-1H",
            "gap": false,
            "date_time_after": "2025-11-02 TIME 01",
            "date_time_before": "2025-11-02 TIME 02",
            "overlap": true
        }
    }
}

Get Timezone by Timezone Name

try {
    $response = $apiInstance->getTimezoneInfo(
        "Europe/London"    //tz (timezone)
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling TimezoneAPI->getTimezoneInfo: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "time_zone": {
        "name": "Europe/London",
        "offset": 0,
        "offset_with_dst": 1,
        "date": "2025-07-02",
        "date_time": "2025-07-02 13:14:06",
        "date_time_txt": "Wednesday, July 02, 2025 13:14:06",
        "date_time_wti": "Wed, 02 Jul 2025 13:14:06 +0100",
        "date_time_ymd": "2025-07-02T13:14:06+01:00",
        "date_time_unix": 1751458446.395,
        "time_24": "13:14:06",
        "time_12": "01:14:06 PM",
        "week": 27,
        "month": 7,
        "year": 2025,
        "year_abbr": "25",
        "is_dst": true,
        "dst_savings": 1,
        "dst_exists": true,
        "dst_start": {
            "utc_time": "2025-03-30 TIME 01",
            "duration": "+1H",
            "gap": true,
            "date_time_after": "2025-03-30 TIME 02",
            "date_time_before": "2025-03-30 TIME 01",
            "overlap": false
        },
        "dst_end": {
            "utc_time": "2025-10-26 TIME 01",
            "duration": "-1H",
            "gap": false,
            "date_time_after": "2025-10-26 TIME 01",
            "date_time_before": "2025-10-26 TIME 02",
            "overlap": true
        }
    }
}

Get Timezone from Any Address

try {
    $response = $apiInstance->getTimezoneInfo(
        null,
        "Munich, Germany"   // location
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling TimezoneAPI->getTimezoneInfo: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "location": {
        "location_string": "Munich, Germany",
        "country_name": "Germany",
        "state_prov": "Bavaria",
        "city": "Munich",
        "locality": "",
        "latitude": "48.13711",
        "longitude": "11.57538"
    },
    "time_zone": {
        "name": "Europe/Berlin",
        "offset": 1,
        "offset_with_dst": 2,
        "date": "2025-07-02",
        "date_time": "2025-07-02 15:12:45",
        "date_time_txt": "Wednesday, July 02, 2025 15:12:45",
        "date_time_wti": "Wed, 02 Jul 2025 15:12:45 +0200",
        "date_time_ymd": "2025-07-02T15:12:45+02:00",
        "date_time_unix": 1751461965.506,
        "time_24": "15:12:45",
        "time_12": "03:12:45 PM",
        "week": 27,
        "month": 7,
        "year": 2025,
        "year_abbr": "25",
        "is_dst": true,
        "dst_savings": 1,
        "dst_exists": true,
        "dst_start": {
            "utc_time": "2025-03-30 TIME 01",
            "duration": "+1H",
            "gap": true,
            "date_time_after": "2025-03-30 TIME 03",
            "date_time_before": "2025-03-30 TIME 02",
            "overlap": false
        },
        "dst_end": {
            "utc_time": "2025-10-26 TIME 01",
            "duration": "-1H",
            "gap": false,
            "date_time_after": "2025-10-26 TIME 02",
            "date_time_before": "2025-10-26 TIME 03",
            "overlap": true
        }
    }
}

Get Timezone from Location Coordinates

try {
    $response = $apiInstance->getTimezoneInfo(
        null,
        null,
        48.8566,   // latitude
        2.3522     // longitude
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling TimezoneAPI->getTimezoneInfo: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "time_zone": {
        "name": "Europe/Paris",
        "offset": 1,
        "offset_with_dst": 2,
        "date": "2025-07-02",
        "date_time": "2025-07-02 15:14:35",
        "date_time_txt": "Wednesday, July 02, 2025 15:14:35",
        "date_time_wti": "Wed, 02 Jul 2025 15:14:35 +0200",
        "date_time_ymd": "2025-07-02T15:14:35+02:00",
        "date_time_unix": 1751462075.118,
        "time_24": "15:14:35",
        "time_12": "03:14:35 PM",
        "week": 27,
        "month": 7,
        "year": 2025,
        "year_abbr": "25",
        "is_dst": true,
        "dst_savings": 1,
        "dst_exists": true,
        "dst_start": {
            "utc_time": "2025-03-30 TIME 01",
            "duration": "+1H",
            "gap": true,
            "date_time_after": "2025-03-30 TIME 03",
            "date_time_before": "2025-03-30 TIME 02",
            "overlap": false
        },
        "dst_end": {
            "utc_time": "2025-10-26 TIME 01",
            "duration": "-1H",
            "gap": false,
            "date_time_after": "2025-10-26 TIME 02",
            "date_time_before": "2025-10-26 TIME 03",
            "overlap": true
        }
    }
}

Get Timezone and Airport Details from IATA Code

try {
    $response = $apiInstance->getTimezoneInfo(
        null,
        null,
        null,
        null,
        null,
        "ZRH"   //IATA Code
        null    //ICAO Code
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling TimezoneAPI->getTimezoneInfo: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "airport_details": {
        "type": "large_airport",
        "name": "Zurich Airport",
        "latitude": "47.45806",
        "longitude": "8.54806",
        "elevation_ft": 1417,
        "continent_code": "EU",
        "country_code": "CH",
        "state_code": "CH-ZH",
        "city": "Zurich",
        "iata_code": "ZRH",
        "icao_code": "LSZH",
        "faa_code": ""
    },
    "time_zone": {
        "name": "Europe/Zurich",
        "offset": 1,
        "offset_with_dst": 2,
        "date": "2025-07-02",
        "date_time": "2025-07-02 15:17:40",
        "date_time_txt": "Wednesday, July 02, 2025 15:17:40",
        "date_time_wti": "Wed, 02 Jul 2025 15:17:40 +0200",
        "date_time_ymd": "2025-07-02T15:17:40+02:00",
        "date_time_unix": 1751462260.085,
        "time_24": "15:17:40",
        "time_12": "03:17:40 PM",
        "week": 27,
        "month": 7,
        "year": 2025,
        "year_abbr": "25",
        "is_dst": true,
        "dst_savings": 1,
        "dst_exists": true,
        "dst_start": {
            "utc_time": "2025-03-30 TIME 01",
            "duration": "+1H",
            "gap": true,
            "date_time_after": "2025-03-30 TIME 03",
            "date_time_before": "2025-03-30 TIME 02",
            "overlap": false
        },
        "dst_end": {
            "utc_time": "2025-10-26 TIME 01",
            "duration": "-1H",
            "gap": false,
            "date_time_after": "2025-10-26 TIME 02",
            "date_time_before": "2025-10-26 TIME 03",
            "overlap": true
        }
    }
}

Similarly, you can fetch Airport Details and Timezone from using any ICAO code as well

Get Timezone and City Details from UN/LOCODE

try {
    $response = $apiInstance->getTimezoneInfo(
        null,
        null,
        null,
        null,
        null,
        null,
        null,
        "ESBCN"   // UN/LOCODE 
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling TimezoneAPI->getTimezoneInfo: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "lo_code_details": {
        "lo_code": "ESBCN",
        "city": "Barcelona",
        "state_code": "",
        "country_code": "ES",
        "country_name": "",
        "location_type": "Port, Rail Terminal, Road Terminal, Airport, Postal Exchange",
        "latitude": "41.38289",
        "longitude": "2.17743"
    },
    "time_zone": {
        "name": "Europe/Madrid",
        "offset": 1,
        "offset_with_dst": 2,
        "date": "2025-07-02",
        "date_time": "2025-07-02 15:24:45",
        "date_time_txt": "Wednesday, July 02, 2025 15:24:45",
        "date_time_wti": "Wed, 02 Jul 2025 15:24:45 +0200",
        "date_time_ymd": "2025-07-02T15:24:45+02:00",
        "date_time_unix": 1751462685.856,
        "time_24": "15:24:45",
        "time_12": "03:24:45 PM",
        "week": 27,
        "month": 7,
        "year": 2025,
        "year_abbr": "25",
        "is_dst": true,
        "dst_savings": 1,
        "dst_exists": true,
        "dst_start": {
            "utc_time": "2025-03-30 TIME 01",
            "duration": "+1H",
            "gap": true,
            "date_time_after": "2025-03-30 TIME 03",
            "date_time_before": "2025-03-30 TIME 02",
            "overlap": false
        },
        "dst_end": {
            "utc_time": "2025-10-26 TIME 01",
            "duration": "-1H",
            "gap": false,
            "date_time_after": "2025-10-26 TIME 02",
            "date_time_before": "2025-10-26 TIME 03",
            "overlap": true
        }
    }
}

Timezone Converter Examples

This section provides usage examples of the convertTimeBetweenTimezones() method from the SDK. The Timezone Converter API allows you to convert a specific time from one timezone to another using timezone identifiers and optional date/time inputs.

For more details, refer to the Timezone Converter API documentation.

Convert Current Time from One Timezone to Another

<?php

require_once(__DIR__ . '/../vendor/autoload.php');

$client = new \GuzzleHttp\Client();
$config = \Ipgeolocation\Sdk\Configuration::getDefaultConfiguration()
    ->setApiKey('apiKey', 'YOUR_API_KEY');

$apiInstance = new \Ipgeolocation\Sdk\Api\TimeConversionAPI($client, $config);

try {
    $response = $apiInstance->convertTimeBetweenTimezones(
                "2024-12-08 11:00", // time
                "America/New_York", // tz_from    
                "Asia/Tokyo",       // tz_to
                null,               // lat_from
                null,               // long_from
                null,               // lat_to
                null,               // long_to,
                null,               // location_from
                null,               // location_to
                null,               // icao_from
                null,               // icao_to
                null,               // iata_from
                null,               // iata_to
                null,               // locode_from
                null                // locode_to
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling TimezoneAPI->convertTimezone: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "original_time": "2024-12-08T11:00:00+00:00",
    "converted_time": "2024-12-09T01:00:00+00:00",
    "diff_hour": 14,
    "diff_min": 840
}

Similarly, you can convert time from any timezone to another timezone using location coordinates (Latitude and Longitude), location addresses, IATA codes, ICAO codes and UN/LUCODE.

User Agent API Examples

This section provides usage examples of the getUserAgent() method from the SDK. The User Agent API extracts and classifies information from user agent strings, including browser, engine, device, OS, and type metadata.

For full explanation, visit the [User Agent API documentation}(https://ipgeolocation.io/user-agent-api.html#documentation-overview).

Parse a Basic User Agent String

<?php

require_once(__DIR__ . '/../vendor/autoload.php');

$client = new \GuzzleHttp\Client();
$config = \Ipgeolocation\Sdk\Configuration::getDefaultConfiguration()
    ->setApiKey('apiKey', 'YOUR_API_KEY');

$apiInstance = new \Ipgeolocation\Sdk\Api\UserAgentAPI($client, $config);

try {
    $response = $apiInstance->getUserAgentDetails(
        "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/125.0.0.0 Safari/537.36", // user_agent
        "json" // output
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling UserAgentAPI->getUserAgentDetails: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "user_agent_string": "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/125.0.0.0 Safari/537.36",
    "name": "Chrome",
    "type": "Browser",
    "version": "125",
    "version_major": "125",
    "device": {
        "name": "Desktop",
        "type": "Desktop",
        "brand": "Unknown",
        "cpu": "Intel x86_64"
    },
    "engine": {
        "name": "Blink",
        "type": "Browser",
        "version": "125",
        "version_major": "125"
    },
    "operating_system": {
        "name": "Windows NT",
        "type": "Desktop",
        "version": "??",
        "version_major": "??",
        "build": "??"
    }
}

Note: If you don’t pass any userAgentString, the API will return the data of the device’s user agent automatically.

Bulk User Agent Parsing Example

The SDK also supports bulk User Agent parsing using the getBulkUserAgent() method. This allows parsing multiple user agent strings in a single request. All fields available in single-user-agent parsing are returned per entry.

<?php

require_once(__DIR__ . '/../vendor/autoload.php');

$client = new \GuzzleHttp\Client();
$config = \Ipgeolocation\Sdk\Configuration::getDefaultConfiguration()
    ->setApiKey('apiKey', 'YOUR_API_KEY');

$apiInstance = new \Ipgeolocation\Sdk\Api\UserAgentAPI($client, $config);

$bulkRequest = new \Ipgeolocation\Sdk\Model\BulkUserAgentRequest([
    'ua_strings' => [
        "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/125.0.0.0 Safari/537.36",
        "Mozilla/5.0 (iPhone; CPU iPhone OS 16_0 like Mac OS X) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/16.0 Mobile/15E148 Safari/604.1"
    ]
]);

try {
    $response = $apiInstance->parseBulkUserAgentStrings(
        null, // output
        $bulkRequest // request body with ua_strings array
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling UserAgentAPI->parseBulkUserAgentStrings: ', $e->getMessage(), PHP_EOL;
}

Astronomy API Examples

This section provides usage examples of the getAstronomyDetails() method from the SDK, allowing developers to fetch sun and moon timings and position data based on coordinates, IP, or location string.

Refer to the official Astronomy API documentation for more details.

Astronomy by Coordinates

<?php

require_once(__DIR__ . '/../vendor/autoload.php');

$client = new \GuzzleHttp\Client();
$config = \Ipgeolocation\Sdk\Configuration::getDefaultConfiguration()
    ->setApiKey('apiKey', 'YOUR_API_KEY');

$apiInstance = new \Ipgeolocation\Sdk\Api\AstronomyAPI($client, $config);

try {
    $response = $apiInstance->getAstronomyDetails(
        null,          // ip
        null,          // location
        '40.7128',     // lat
        '-74.0060',    // long
        null,          // date
        null,          // output
        null           // lang
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling AstronomyAPI->getAstronomyDetails: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "location": {
        "latitude": "40.71280",
        "longitude": "-74.00600"
    },
    "astronomy": {
        "date": "2025-07-02",
        "current_time": "11:33:43.910",
        "sunrise": "05:29",
        "sunset": "20:31",
        "sun_status": "-",
        "solar_noon": "13:00",
        "day_length": "15:02",
        "sun_altitude": 64.60519855724556,
        "sun_distance": 152091057.34967417,
        "sun_azimuth": 127.71271299905499,
        "moonrise": "13:05",
        "moonset": "00:16",
        "moon_status": "-",
        "moon_altitude": -16.485227017987437,
        "moon_distance": 401312.7064058426,
        "moon_azimuth": 82.35580282820229,
        "moon_parallactic_angle": -48.95602696917828,
        "moon_phase": "FIRST_QUARTER",
        "moon_illumination_percentage": "48.37",
        "moon_angle": 88.13033380732443
    }
}

Astronomy by IP Address

try {
    $response = $apiInstance->getAstronomyDetails(
        '8.8.8.8',     // ip
        null,          // location
        null,          // lat
        null,          // long
        null,          // date
        null,          // output
        null           // lang
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling AstronomyAPI->getAstronomyDetails: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "ip": "8.8.8.8",
    "location": {
        "continent_code": "NA",
        "continent_name": "North America",
        "country_code2": "US",
        "country_code3": "USA",
        "country_name": "United States",
        "country_name_official": "United States of America",
        "is_eu": false,
        "state_prov": "California",
        "state_code": "US-CA",
        "district": "Santa Clara",
        "city": "Mountain View",
        "zipcode": "94043-1351",
        "latitude": "37.42240",
        "longitude": "-122.08421"
    },
    "astronomy": {
        "date": "2025-07-02",
        "current_time": "08:35:24.017",
        "sunrise": "05:52",
        "sunset": "20:33",
        "sun_status": "-",
        "solar_noon": "13:12",
        "day_length": "14:41",
        "sun_altitude": 29.727124398261573,
        "sun_distance": 152091057.34967408,
        "sun_azimuth": 82.5800469052528,
        "moonrise": "13:23",
        "moonset": "00:32",
        "moon_status": "-",
        "moon_altitude": -50.47137015818346,
        "moon_distance": 401316.28443787183,
        "moon_azimuth": 41.2223448233039,
        "moon_parallactic_angle": -31.695968751578842,
        "moon_phase": "FIRST_QUARTER",
        "moon_illumination_percentage": "48.38",
        "moon_angle": 88.14312012150289
    }
}

Astronomy by Location String

<?php

try {
    $response = $apiInstance->getAstronomyDetails(
        null,              // ip
        'Milan, Italy',    // location
        null,              // lat
        null,              // long
        null,              // date
        null,              // output
        null               // lang
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling AstronomyAPI->getAstronomyDetails: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "location": {
        "location_string": "Milan, Italy",
        "country_name": "Italy",
        "state_prov": "Lombardy",
        "city": "Milan",
        "locality": "",
        "latitude": "45.46419",
        "longitude": "9.18963"
    },
    "astronomy": {
        "date": "2025-07-02",
        "current_time": "17:36:52.614",
        "sunrise": "05:39",
        "sunset": "21:15",
        "sun_status": "-",
        "solar_noon": "13:27",
        "day_length": "15:36",
        "sun_altitude": 35.29901259540189,
        "sun_distance": 152091057.34967408,
        "sun_azimuth": 267.84758325684675,
        "moonrise": "13:21",
        "moonset": "00:38",
        "moon_status": "-",
        "moon_altitude": 35.30945277541418,
        "moon_distance": 401319.4496923796,
        "moon_azimuth": 150.92976273169086,
        "moon_parallactic_angle": -20.006179620678108,
        "moon_phase": "FIRST_QUARTER",
        "moon_illumination_percentage": "48.39",
        "moon_angle": 88.1544361230112
    }
}

Astronomy for Specific Date

<?php

try {
    $response = $apiInstance->getAstronomyDetails(
        null,          // ip
        null,          // location
        '-27.47',      // lat
        '153.02',      // long
        '2025-01-01',  // date
        null,          // output
        null           // lang
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling AstronomyAPI->getAstronomyDetails: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "location": {
        "latitude": "-27.47000",
        "longitude": "153.02000"
    },
    "astronomy": {
        "date": "2025-01-01",
        "current_time": "01:38:40.839",
        "sunrise": "04:56",
        "sunset": "18:46",
        "sun_status": "-",
        "solar_noon": "11:51",
        "day_length": "13:50",
        "sun_altitude": -33.234388679504406,
        "sun_distance": 147102938.88036567,
        "sun_azimuth": 150.18832541030406,
        "moonrise": "05:42",
        "moonset": "20:08",
        "moon_status": "-",
        "moon_altitude": -33.4494782116783,
        "moon_distance": 383163.4660921515,
        "moon_azimuth": 162.12618128378313,
        "moon_parallactic_angle": -162.242464392383,
        "moon_phase": "NEW_MOON",
        "moon_illumination_percentage": "0.58",
        "moon_angle": 8.77176403755275
    }
}{
    "location": {
        "latitude": "-27.47000",
        "longitude": "153.02000"
    },
    "astronomy": {
        "date": "2025-01-01",
        "current_time": "01:38:40.839",
        "sunrise": "04:56",
        "sunset": "18:46",
        "sun_status": "-",
        "solar_noon": "11:51",
        "day_length": "13:50",
        "sun_altitude": -33.234388679504406,
        "sun_distance": 147102938.88036567,
        "sun_azimuth": 150.18832541030406,
        "moonrise": "05:42",
        "moonset": "20:08",
        "moon_status": "-",
        "moon_altitude": -33.4494782116783,
        "moon_distance": 383163.4660921515,
        "moon_azimuth": 162.12618128378313,
        "moon_parallactic_angle": -162.242464392383,
        "moon_phase": "NEW_MOON",
        "moon_illumination_percentage": "0.58",
        "moon_angle": 8.77176403755275
    }
}

Astronomy in Different Language

You can also get Astronomy Data in other languages as well. Only paid subscriptions can access this feature.

<?php

try {
    $response = $apiInstance->getAstronomyDetails(
        '1.1.1.1',     // ip
        null,          // location
        null,          // lat
        null,          // long
        null,          // date
        null,          // output
        'fr'           // lang
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling AstronomyAPI->getAstronomyDetails: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "ip": "1.1.1.1",
    "location": {
        "continent_code": "OC",
        "continent_name": "Océanie",
        "country_code2": "AU",
        "country_code3": "AUS",
        "country_name": "Australie",
        "country_name_official": "",
        "is_eu": false,
        "state_prov": "Queensland",
        "state_code": "AU-QLD",
        "district": "Brisbane",
        "city": "Brisbane Sud",
        "zipcode": "4101",
        "latitude": "-27.47306",
        "longitude": "153.01421"
    },
    "astronomy": {
        "date": "2025-07-03",
        "current_time": "01:41:54.387",
        "sunrise": "06:38",
        "sunset": "17:05",
        "sun_status": "-",
        "solar_noon": "11:52",
        "day_length": "10:27",
        "sun_altitude": -64.82670538480211,
        "sun_distance": 152094109.8984562,
        "sun_azimuth": 94.12181160959807,
        "moonrise": "11:36",
        "moonset": "-:-",
        "moon_status": "-",
        "moon_altitude": -24.947756496666866,
        "moon_distance": 401330.22119413473,
        "moon_azimuth": 249.3607008183168,
        "moon_parallactic_angle": 123.53076611113647,
        "moon_phase": "FIRST_QUARTER",
        "moon_illumination_percentage": "48.42",
        "moon_angle": 88.19297863368297
    }
}

Abuse Contact API Examples

This section demonstrates how to use the getAbuseContactInfo() method of the AbuseContact API. This API helps security teams, hosting providers, and compliance professionals quickly identify the correct abuse reporting contacts for any IPv4 or IPv6 address. You can retrieve data like the responsible organization, role, contact emails, phone numbers, and address to take appropriate mitigation action against abusive or malicious activity.Note that Abuse Contact API is only available in Advanced Plan

Refer to the official Abuse Contact API documentation for details on all available fields.

Lookup Abuse Contact by IP

<?php

require_once(__DIR__ . '/../vendor/autoload.php');

$client = new \GuzzleHttp\Client();
$config = \Ipgeolocation\Sdk\Configuration::getDefaultConfiguration()
    ->setApiKey('apiKey', 'YOUR_API_KEY');

$apiInstance = new \Ipgeolocation\Sdk\Api\AbuseContactAPI($client, $config);

try {
    $response = $apiInstance->getAbuseContactInfo(
        '1.0.0.0',  // ip
        null,       // excludes
        null        // fields
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling AbuseContactAPI->getAbuseContactInfo: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "ip": "1.0.0.0",
    "abuse": {
        "route": "1.0.0.0/24",
        "country": "AU",
        "handle": "IRT-APNICRANDNET-AU",
        "name": "IRT-APNICRANDNET-AU",
        "organization": "",
        "role": "abuse",
        "kind": "group",
        "address": "PO Box 3646\nSouth Brisbane, QLD 4101\nAustralia",
        "emails": [
            "helpdesk@apnic.net"
        ],
        "phone_numbers": [
            "+61 7 3858 3100"
        ]
    }
}

Lookup Abuse Contact with Specific Fields

try {
    $response = $apiInstance->getAbuseContactInfo(
        '1.2.3.4',                          // ip
        null,                               // excludes
        'abuse.role,abuse.emails'           // fields
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling AbuseContactAPI->getAbuseContactInfo: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "ip": "1.2.3.4",
    "abuse": {
        "role": "abuse",
        "emails": [
            "helpdesk@apnic.net"
        ]
    }
}

Lookup Abuse Contact while Excluding Fields

try {
    $response = $apiInstance->getAbuseContactInfo(
        '9.9.9.9',                             // ip
        'abuse.handle,abuse.emails',           // excludes
        null                                   // fields
    );
    echo json_encode($response, JSON_PRETTY_PRINT | JSON_UNESCAPED_UNICODE | JSON_UNESCAPED_SLASHES);
} catch (\Exception $e) {
    echo 'Exception when calling AbuseContactAPI->getAbuseContactInfo: ', $e->getMessage(), PHP_EOL;
}

Sample Response:

{
    "ip": "9.9.9.9",
    "abuse": {
        "route": "9.9.9.0/24",
        "country": "",
        "name": "Quad9 Abuse",
        "organization": "Quad9 Abuse",
        "role": "abuse",
        "kind": "group",
        "address": "1442 A Walnut Street Ste 501\nBerkeley\nCA\n94709\nUnited States",
        "phone_numbers": [
            "+1-415-831-3129"
        ]
    }
}

Models

License

This project is licensed under the Apache License 2.0.