binary-cats / laravel-bigbluebutton-webhooks
Handle BigBlueButton webhooks in a Laravel application
Requires
- php: ^8.0
- illuminate/support: ^8.0|^9.0
- spatie/laravel-webhook-client: ^3.0
Requires (Dev)
- orchestra/testbench: ^6.0|^7.0
- phpunit/phpunit: ^9.4
Suggests
- binary-cats/laravel-lob-webhooks: Handle lob.com webhooks in your Laravel application
- binary-cats/laravel-mailgun-webhooks: Handle mailgun.com webhooks in your Laravel application
README
BigBlueButton can notify your application of mail events using webhooks. This package can help you handle those webhooks. Out of the box it will verify the BigBlueButton signature of all incoming requests. It appears that the signature validation is below simplie right now and does not match the documentation. All valid calls will be logged to the database. You can easily define jobs or events that should be dispatched when specific events hit your app.
This package will not handle what should be done after the webhook request has been validated and the right job or event is called. You should still code up any work (eg. regarding payments) yourself.
Before using this package we highly recommend reading the entire documentation on webhooks over at BigBlueButton.
This package is an almost line-to-line adapted copy of absolutely amazing spatie/laravel-stripe-webhooks
Installation
You can install the package via composer:
composer require binary-cats/laravel-bigbluebutton-webhooks
The service provider will automatically register itself.
You must publish the config file with:
php artisan vendor:publish --provider="BinaryCats\BigBlueButtonWebhooks\BigBlueButtonWebhooksServiceProvider" --tag="config"
This is the contents of the config file that will be published at config/bigbluebutton-webhooks.php
:
return [ /* * BigBlueButton will sign each webhook using a shared secret. */ 'signing_secret' => env('BBB_SECRET'), /* * You can define the job that should be run when a certain webhook hits your application * here. The key is the name of the BigBlueButton event type with the `.` replaced by a `_`. * * The package will automatically convert the keys to lowercase, but you should * be cognisant of the fact that array keys are case-sensitive */ 'jobs' => [ 'meeting-created' => \BinaryCats\BigBlueButtonWebhooks\Jobs\MeetingCreatedJob::class, ], /* * The classname of the model to be used. The class should equal or extend * Spatie\WebhookClient\Models\WebhookCall */ 'model' => \BinaryCats\BigBlueButtonWebhooks\WebhookCall::class, /* * The classname of the model to be used. The class should equal or extend * Spatie\WebhookClient\ProcessWebhookJob */ 'process_webhook_job' => \BinaryCats\BigBlueButtonWebhooks\ProcessBigBlueButtonWebhookJob::class, ];
In the signing_secret
key of the config file you should add a valid shared secret of the BigBlueButton server.
You can skip migrating is you have already installed Spatie\WebhookClient
Next, you must publish the migration with:
php artisan vendor:publish --provider="Spatie\WebhookClient\WebhookClientServiceProvider" --tag="migrations"
After migration has been published you can create the webhook_calls
table by running the migrations:
php artisan migrate
Routing
Finally, take care of the routing: You must configure at what url BigBlueButton webhooks should hit your app. In the routes file of your app you must pass that route to Route::bigbluebuttonWebhooks()
:
I like to group functionality by domain, so I would suggest webhooks/bigbluebutton
(especially if you plan to have more webhooks), but it is really up to you.
# routes\web.php Route::bigbluebuttonWebhooks('webhooks/bigbluebutton');
Behind the scenes this will register a POST
route to a controller provided by this package. Because BigBlueButton has no way of getting a csrf-token, you must add that route to the except
array of the VerifyCsrfToken
middleware:
protected $except = [ 'webhooks/bigbluebutton', ];
Usage
BigBlueButton will send out webhooks for several event types. I tried to locate the comprehensive list of all BigBLueButton events, however in vain. If you have it, please let me know
BigBlueButton will sign all requests hitting the webhook url of your app. This package will automatically verify if the signature is valid. If it is not, the request was probably not sent by BigBlueButton.
Unless something goes terribly wrong, this package will always respond with a 200
to webhook requests. Sending a 200
will prevent BigBlueButton from resending the same event over and over again. All webhook requests with a valid signature will be logged in the webhook_calls
table. The table has a payload
column where the entire payload of the incoming webhook is saved.
If the signature is not valid, the request will NOT be logged in the webhook_calls
table but a BinaryCats\BigBlueButtonWebhooks\Exceptions\WebhookFailed
exception will be thrown.
If something goes wrong during the webhook request the thrown exception will be saved in the exception
column. In that case the controller will send a 500
instead of 200
.
The package will ALWAYS cast events to lowercase - so your configured keys must be lowercase, too
N.B.: According to the docs:
Hooks are only removed if a call to /hooks/destroy is made or if the callbacks for the hook fail too many times (~12) for a long period of time (~5min).
N.N.B.: Payload structure:
The payload that is sent from BigBlueButton is sort of split between into three sections. Out of the box the package will store whatever BBB sends back to you within payload via
$request->input()
. If you want to transform the payload, you may want to use custom model. Advanced Usage
There are two ways this package enables you to handle webhook requests: you can opt to queue a job or listen to the events the package will fire.
Handling webhook requests using jobs
If you want to do something when a specific event type comes in you can define a job that does the work. Here's an example of such a job:
<?php namespace App\Jobs\BigBlueButtonWebhooks; use Illuminate\Bus\Queueable; use Illuminate\Queue\SerializesModels; use Illuminate\Queue\InteractsWithQueue; use Illuminate\Contracts\Queue\ShouldQueue; use Spatie\WebhookClient\Models\WebhookCall; class HandleDelivered implements ShouldQueue { use InteractsWithQueue, Queueable, SerializesModels; /** @var \Spatie\WebhookClient\Models\WebhookCall */ public $webhookCall; public function __construct(WebhookCall $webhookCall) { $this->webhookCall = $webhookCall; } public function handle() { // do your work here // you can access the payload of the webhook call with `$this->webhookCall->payload` } }
Spatie highly recommends that you make this job queueable, because this will minimize the response time of the webhook requests. This allows you to handle more BigBlueButton webhook requests and avoid timeouts.
Take a second to review BinaryCats\BigBlueButtonWebhooks\Tests\PayloadDefinition::getPayloadDefinition()
to see how the payload is structured.
After having created your job you must register it at the jobs
array in the bigbluebutton-webhooks.php
config file. The key should be the name of BigBlueButton event type where but with the .
replaced by _
. The value should be the fully qualified classname.
// config/bigbluebutton-webhooks.php 'jobs' => [ 'meeting-created' => \App\Jobs\BigBlueButtonWebhooks\MeetingCreatedJob::class, ],
Handling webhook requests using events
Instead of queueing jobs to perform some work when a webhook request comes in, you can opt to listen to the events this package will fire. Whenever a valid request hits your app, the package will fire a bigbluebutton-webhooks::<name-of-the-event>
event.
The payload of the events will be the instance of WebhookCall
that was created for the incoming request.
Let's take a look at how you can listen for such an event. In the EventServiceProvider
you can register listeners.
/** * The event listener mappings for the application. * * @var array */ protected $listen = [ 'bigbluebutton-webhooks::meeting-created' => [ App\Listeners\MeetingCreatedListener::class, ], ];
Here's an example of such a listener:
<?php namespace App\Listeners; use Illuminate\Contracts\Queue\ShouldQueue; use Spatie\WebhookClient\Models\WebhookCall; class MeetingCreatedListener implements ShouldQueue { public function handle(WebhookCall $webhookCall) { // do your work here // you can access the payload of the webhook call with `$webhookCall->payload` } }
Spatie highly recommends that you make the event listener queueable, as this will minimize the response time of the webhook requests. This allows you to handle more BigBlueButton webhook requests and avoid timeouts.
The above example is only one way to handle events in Laravel. To learn the other options, read the Laravel documentation on handling events.
Advanced usage
Transforming the payload
If you want to change how the payload is saved into the database, for instance, to have the event
name as a top tier element, you may want to use custom model:
use Illuminate\Http\Request; use Illuminate\Support\Arr; use Spatie\WebhookClient\Models\WebhookCall as Model; use Spatie\WebhookClient\WebhookConfig; class WebhookCall extends Model { /** * @param \Spatie\WebhookClient\WebhookConfig $config * @param \Illuminate\Http\Request $request * @return \Spatie\WebhookClient\Models\WebhookCall */ public static function storeWebhook(WebhookConfig $config, Request $request): Model { // bigblubutton payload is build in expectation of multiple events $payload = $request->input(); // transform event if ($event = Arr::get($payload, 'event', null) and is_string($event)) { $payload['event'] = json_decode($event, true); } // take the headers form the top $headers = self::headersToStore($config, $request); // parse and return return self::create([ 'name' => $config->name, 'url' => $request->fullUrl(), 'headers' => $headers, 'payload' => $payload, ]); } }
and register it in bitbluebutton-webhooks.model
config key. The above example is based on
Retry handling a webhook
All incoming webhook requests are written to the database. This is incredibly valuable when something goes wrong while handling a webhook call. You can easily retry processing the webhook call, after you've investigated and fixed the cause of failure, like this:
use Spatie\WebhookClient\Models\WebhookCall; use BinaryCats\BigBlueButtonWebhooks\ProcessBigBlueButtonWebhookJob; dispatch(new ProcessBigBlueButtonWebhookJob(WebhookCall::find($id)));
Performing custom logic
You can add some custom logic that should be executed before and/or after the scheduling of the queued job by using your own job class. You can do this by specifying your own job class in the process_webhook_job
key of the bigbluebutton-webhooks
config file. The class should extend BinaryCats\BigBlueButtonWebhooks\ProcessBigBlueButtonWebhookJob
.
Here's an example:
use BinaryCats\BigBlueButtonWebhooks\ProcessBigBlueButtonWebhookJob; class MyCustomBigBlueButtonWebhookJob extends ProcessBigBlueButtonWebhookJob { public function handle() { // do some custom stuff beforehand parent::handle(); // do some custom stuff afterwards } }
Handling multiple signing secrets
When needed might want to the package to handle multiple endpoints and secrets. Here's how to configurate that behaviour.
If you are using the Route::bigbluebuttonWebhooks
macro, you can append the configKey
as follows:
Route::bigbluebuttonWebhooks('webhooks/bigbluebutton/{configKey}');
Alternatively, if you are manually defining the route, you can add configKey
like so:
Route::post('webhooks/bigbluebutton/{configKey}', 'BinaryCats\BigBlueButtonWebhooks\BigBlueButtonWebhooksController');
If this route parameter is present the verify middleware will look for the secret using a different config key, by appending the given the parameter value to the default config key. E.g. If BigBlueButton posts to webhooks/bigbluebutton/my-named-secret
you'd add a new config named signing_secret_my-named-secret
.
Example config might look like:
// secret for when BigBlueButton posts to webhooks/bigbluebutton/account 'signing_secret_account' => 'whsec_abc', // secret for when BigBlueButton posts to webhooks/bigbluebutton/my-named-secret 'signing_secret_my-named-secret' => 'whsec_123',
About BigBlueButton
BigBlueButton is an open source web conferencing system for online learning.
Changelog
Please see CHANGELOG for more information about what has changed recently.
Testing
composer test
Contributing
Please see CONTRIBUTING for details.
Security
If you discover any security related issues, please email cyrill.kalita@gmail.com instead of using issue tracker.
Postcardware
You're free to use this package, but if it makes it to your production environment we highly appreciate you sending us a postcard from your hometown, mentioning which of our package(s) you are using.
Credits
Big shout-out to Spatie for their work, which is a huge inspiration.
Support us
Binary Cats is a webdesign agency based in Illinois, US.
License
The MIT License (MIT). Please see License File for more information.