README

Filament Companies

A comprehensive multi-tenant authentication and authorization solution designed for Filament, with a focus on company-based tenancy.

🔥 Socialite
🔥 Terms & Privacy Policy
🔥 Password Reset via Email
🔥 Personal Profile Management
🔥 Browser Session Management
🔥 Sanctum
🔥 Company Management
🔥 Employee Invitations via Email
🔥 Roles & Permissions

Getting Started

Create a fresh Laravel Project
Configure your database
Install the Panel Builder

After installing the Panel Builder, make sure that you have created a panel using the following command:

php artisan filament:install --panels

📝 If you've followed the Panel Builder documentation, you should have already done this.

Installation

Install the package

composer require andrewdwallo/filament-companies

Execute the following Artisan command to scaffold the application. You will be prompted to choose between installing the Base package or enabling Socialite support.

php artisan filament-companies:install

Run migrations:

php artisan migrate:fresh

Preparing Your Application

Creating a Theme

After installation, there will be a company panel registered for your application. It is located within the FilamentCompaniesServiceProvider.php file.

In order for Tailwind to process the CSS used within this package and for the company panel, a user must create a custom theme.

To create a custom theme for the company panel, you can use the following command:

php artisan make:filament-theme company

🛠️ Please follow the instructions in the console to complete the setup process

Here is a reference to the instructions that should show after running the command:

⇂ First, add a new item to the `input` array of `vite.config.js`: `resources/css/filament/company/theme.css`  
⇂ Next, register the theme in the company panel provider using `->viteTheme('resources/css/filament/company/theme.css')`  
⇂ Finally, run `npm run build` to compile the theme

After completing the process for creating a custom theme for the company panel, add this package's vendor directory into the content array of the tailwind.config.js file that should be located in the resources/css/filament/company/ directory of your application:

export default {
    content: [
        './resources/**/*.blade.php',
        './vendor/filament/**/*.blade.php',
        './vendor/andrewdwallo/filament-companies/resources/views/**/*.blade.php', // The package's vendor directory
    ],
    // ...
}

The User Panel

As you may have noticed, after installation, there will be a company panel registered for your application. In order for this package to work you must also have a "User" panel to contain the Profile page and Personal Access Tokens page.

For this example, I will use the default panel that Filament provides when installing the panel builder, the "Admin" panel.

In your "Admin" panel, make sure to register the following pages:

use Wallo\FilamentCompanies\Pages\User\PersonalAccessTokens;
use Wallo\FilamentCompanies\Pages\User\Profile;

public function panel(Panel $panel): Panel
{
    return $panel
        // ...
        ->pages([
            Profile::class,
            PersonalAccessTokens::class,
        ])
}

🛑 You may create a separate User Panel following the documentation for creating a new panel

You must provide a way for your users to navigate to the Profile and Personal Access Tokens pages.

It would also be wise to allow your users to navigate back to the Company Panel.

You may use the following as a guide:

use Filament\Navigation\MenuItem;
use Filament\Navigation\NavigationItem;
use Illuminate\Support\Facades\Auth;
use Wallo\FilamentCompanies\Pages\User\PersonalAccessTokens;
use Wallo\FilamentCompanies\Pages\User\Profile;

public function panel(Panel $panel): Panel
{
    return $panel
        // ...
        ->userMenuItems([
            'profile' => MenuItem::make()
                ->label('Profile')
                ->icon('heroicon-o-user-circle')
                ->url(static fn () => url(Profile::getUrl())),
            MenuItem::make()
                ->label('Company')
                ->icon('heroicon-o-building-office')
                ->url(static fn () => url(Pages\Dashboard::getUrl(panel: 'company', tenant: Auth::user()->personalCompany()))),
        ])
        ->navigationItems([
            NavigationItem::make('Personal Access Tokens')
                ->label(static fn (): string => __('filament-companies::default.navigation.links.tokens'))
                ->icon('heroicon-o-key')
                ->url(static fn () => url(PersonalAccessTokens::getUrl())),
        ])
}

You may change the value used for the User Panel using the id of the panel:

use Filament\Panel;
use Wallo\FilamentCompanies\FilamentCompanies;

class FilamentCompaniesServiceProvider extends PanelProvider
{
    public function panel(Panel $panel): Panel
    {
        return $panel
            // ...
            ->plugin(
                FilamentCompanies::make()
                    ->userPanel('user')
            )
    }
}

🚧 Make sure to create a panel with the id you're passing

The Default Panel

If you want users to directly access the Company panel's Register or Login page from the Laravel Welcome page, ensure the Company panel is set as the default in Filament. This involves two key steps:

Remove Default from User Panel: Ensure the User panel or any previously default panel does not use the ->default() method.
Set Company Panel as Default: Apply the ->default() method to your Company panel configuration to make it the default entry point.

By making the Company panel the default, links to Register or Login on the Laravel Welcome page will lead directly to the Company panel's authentication pages.

Translations and Views

If you wish to translate the package, you may publish the language files using:

php artisan vendor:publish --tag=filament-companies-translations

If you wish to customize the views, you may publish them using:

php artisan vendor:publish --tag=filament-companies-views

Usage & Configuration

Switching the Current Company

Filament has a built-in event that is fired when the application needs to set the tenant for the current request. This event is Filament\Events\TenantSet. If you would like to either enable or disable the ability to switch the current company, you may do so by using the switchCurrentCompany() method in your FilamentCompaniesServiceProvider class.

use Filament\Panel;
use Wallo\FilamentCompanies\FilamentCompanies;

class FilamentCompaniesServiceProvider extends PanelProvider
{
    public function panel(Panel $panel): Panel
    {
        return $panel
            // ...
            ->plugin(
                FilamentCompanies::make()
                    ->switchCurrentCompany()
            );
    }
}

Configuring Profile Features

You can selectively enable or disable certain profile features. If you choose to omit a feature, it will be considered as disabled (false) by default.

To do so, modify your FilamentCompaniesServiceProvider class as shown below:

use Filament\Panel;
use Wallo\FilamentCompanies\FilamentCompanies;

class FilamentCompaniesServiceProvider extends PanelProvider
{
    public function panel(Panel $panel): Panel
    {
        return $panel
            // ...
            ->plugin(
                FilamentCompanies::make()
                    ->updateProfileInformation()  // Enables updating profile information
                    ->updatePasswords()           // Enables password updates
                    ->setPasswords()              // Enables setting passwords only if Socialite is enabled
                    ->connectedAccounts()         // Enables connected account management only if Socialite is enabled
                    ->manageBrowserSessions()     // Enables browser session management
                    ->accountDeletion()           // Enables account deletion
            );
    }
}

Customizing Components

Personalize your application by replacing default components with your own custom components. This is done by passing your custom component's class name to the component parameter of the relevant method.

Important: Your custom component must have a unique class name. This is crucial to prevent conflicts and ensure proper functioning, as Livewire differentiates components primarily by their class names. Even if your custom component is in a different namespace, having the same class name as a component in the package can lead to unexpected errors and behavior.

Here's an example of how to use a custom component for updating profile information:

use App\Livewire\CustomComponent;

FilamentCompanies::make()
    ->updateProfileInformation(component: CustomComponent::class);

Sorting Components

If you would like to change the order of the profile features, you may do so by setting the sort parameter to the corresponding method.

The default sort order is as follows:

FilamentCompanies::make()
    ->updateProfileInformation(sort: 0)
    ->updatePasswords(sort: 1)
    ->setPasswords(sort: 2)
    ->connectedAccounts(sort: 3)
    ->manageBrowserSessions(sort: 4)
    ->accountDeletion(sort: 5);

Adding Components

If you would like to add custom profile components, you may do so by passing the component class name along with the sort order to the addProfileComponents() method:

use App\Livewire\CustomComponent;

FilamentCompanies::make()
    ->addProfileComponents([
        7 => CustomComponent::class,
    ]);

Within your component's view, you may use the grid section component to match the style of other components:

<x-filament-companies::grid-section md="2">
    <x-slot name="title">
        {{ __('My Custom Component') }}
    </x-slot>

    <x-slot name="description">
        {{ __('This is my custom component.') }}
    </x-slot>

    <x-filament::section>
        <x-filament-panels::form wire:submit="submit">
            {{ $this->form }}

            <div class="text-left">
                <x-filament::button type="submit">
                    {{ __('Save') }}
                </x-filament::button>
            </div>
        </x-filament-panels::form>
    </x-filament::section>
</x-filament-companies::grid-section>

Profile Photos

To allow users to upload custom profile photos, you can enable this feature by including the profilePhotos() method in your FilamentCompaniesServiceProvider.

use Filament\Panel;
use Wallo\FilamentCompanies\FilamentCompanies;

class FilamentCompaniesServiceProvider extends PanelProvider
{
    public function panel(Panel $panel): Panel
    {
        return $panel
            // ...
            ->plugin(
                FilamentCompanies::make()
                    ->profilePhotos()
            )
    }
}

Disk Storage

By default, the package uses Laravel's public disk for storing images. However, you can specify a different disk by passing the disk parameter.

FilamentCompanies::make()
    ->profilePhotos(disk: 's3')

Storage Path

If you want to store profile photos in a specific directory, you can set the storagePath parameter.

FilamentCompanies::make()
    ->profilePhotos(storagePath: 'profile-avatars')

Modals

To adjust the layout and behavior of modals, use the modals() method. Below are the package's default settings:

use Filament\Panel;
use Wallo\FilamentCompanies\FilamentCompanies;

class FilamentCompaniesServiceProvider extends PanelProvider
{
    public function panel(Panel $panel): Panel
    {
        return $panel
            // ...
            ->plugin(
                FilamentCompanies::make()
                    ->modals(
                        width: '2xl', 
                        alignment: 'center', 
                        formActionsAlignment: 'center', 
                        cancelButtonAction: false
                    )
            );
    }
}

Notifications

To configure the notifications that are sent by the package, use the notifications() method.

Unless specified otherwise, the package will send notifications. In order to disable notifications, you must pass false to the notifications() method.

use Filament\Panel;
use Wallo\FilamentCompanies\FilamentCompanies;

class FilamentCompaniesServiceProvider extends PanelProvider
{
    public function panel(Panel $panel): Panel
    {
        return $panel
            // ...
            ->plugin(
                FilamentCompanies::make()
                    ->notifications(condition: false)
            );
    }
}

Overriding Notifications

To override the default notifications sent by the package, you should provide the following methods for each corresponding action.

The parameters passed to each method are optional and may be omitted if not needed.

Update User Profile Information

\App\Actions\FilamentCompanies\UpdateUserProfileInformation::class

/** @method void profileInformationUpdated(\Illuminate\Foundation\Auth\User|null $user = null, array|null $input = null) */

Update User Password

\App\Actions\FilamentCompanies\UpdateUserPassword::class

/** @method void passwordUpdated(\Illuminate\Foundation\Auth\User|null $user = null, array|null $input = null) */

Set User Password

\App\Actions\FilamentCompanies\SetUserPassword::class

/** @method void passwordSet(\Illuminate\Foundation\Auth\User|null $user, array|null $input = null) */

Update Company Name

\App\Actions\FilamentCompanies\UpdateCompanyName::class

/** @method void companyNameUpdated(\Illuminate\Foundation\Auth\User|null $user = null, \Illuminate\Database\Eloquent\Model|null $company = null, array|null $input = null) */

Invite Company Employee

\App\Actions\FilamentCompanies\InviteCompanyEmployee::class

/** @method void employeeInvitationSent(\Illuminate\Foundation\Auth\User|null $user = null, \Illuminate\Database\Eloquent\Model|null $company = null, string|null $email = null, string|null $role = null) */

Delete Company

\App\Actions\FilamentCompanies\DeleteCompany::class

/** @method void companyDeleted(\Illuminate\Database\Eloquent\Model|null $company = null) */

Example

If you would like to override the notification that is sent when a user updates their password, you may do the following:

<?php

namespace App\Actions\FilamentCompanies;

use App\Models\User;
use Filament\Notifications\Notification;
use Wallo\FilamentCompanies\Contracts\UpdatesUserPasswords;

class UpdateUserPassword implements UpdatesUserPasswords
{
    /**
     * Validate and update the user's password.
     *
     * @param  array<string, string>  $input
     */
    public function update(User $user, array $input): void
    {
       // ...
    }

    public function passwordUpdated(): void
    {
        Notification::make()
            ->title('Password Updated')
            ->body('Your password has been updated.')
            ->success();
            ->send();
    }
    
}

Company Invitations

Example - Gmail

Sign in to your account
Go to App passwords
Click on "Select app", enter name of Application, and then click "Generate".
Copy your app password and store it somewhere safe.
Add the credentials in your application's .env file:

MAIL_MAILER=smtp
MAIL_HOST=smtp.gmail.com
MAIL_PORT=587
MAIL_USERNAME=yourgmailusername@gmail.com
MAIL_PASSWORD=of9f9279g924792g49t          
MAIL_ENCRYPTION=tls                         
MAIL_FROM_ADDRESS="filament@company.com"
MAIL_FROM_NAME="${APP_NAME}"

Roles & Permissions

You may change the roles & permissions in app/Providers/FilamentCompaniesServiceProvider.php

/**
 * Configure the roles and permissions that are available within the application.
 */
protected function configurePermissions(): void
{
    FilamentCompanies::defaultApiTokenPermissions(['read']);

    FilamentCompanies::role('admin', 'Administrator', [
        'create',
        'read',
        'update',
        'delete',
    ])->description('Administrator users can perform any action.');

    FilamentCompanies::role('editor', 'Editor', [
        'read',
        'create',
        'update',
    ])->description('Editor users have the ability to read, create, and update.');
}

Socialite

By Default, the GitHub Provider will be enabled.

You may use any Provider that Laravel Socialite supports.

You may add or remove any Provider in the company panel configuration:

use Filament\Panel;
use Wallo\FilamentCompanies\FilamentCompanies;
use Wallo\FilamentCompanies\Enums\Feature;
use Wallo\FilamentCompanies\Enums\Provider;

class FilamentCompaniesServiceProvider extends PanelProvider
{
    public function panel(Panel $panel): Panel
    {
        return $panel
            // ...
            ->plugin(
                FilamentCompanies::make()
                    ->socialite(
                        providers: [
                            Provider::Github,
                            Provider::Gitlab,
                            Provider::Google,
                            Provider::Facebook,
                            Provider::Linkedin,
                            Provider::LinkedinOpenId,
                            Provider::Bitbucket,
                            Provider::Slack,
                            Provider::Twitter,
                            Provider::TwitterOAuth2,
                        ],
                        features: [
                            Feature::RememberSession,
                            Feature::ProviderAvatars,
                            Feature::GenerateMissingEmails,
                            Feature::LoginOnRegistration,
                            Feature::CreateAccountOnFirstLogin,
                        ]
                    )
            )
    }
}

⚠️ If Twitter is desired, you may only use either Twitter OAuth1 or Twitter OAuth2.

Pass your Provider's credentials in the provider's array in config/services.php:

    /*
    |--------------------------------------------------------------------------
    | Third Party Services
    |--------------------------------------------------------------------------
    |
    | This file is for storing the credentials for third party services such
    | as Mailgun, Postmark, AWS and more. This file provides the de facto
    | location for this type of information, allowing packages to have
    | a conventional file to locate the various service credentials.
    |
    */
    
    'github' => [
        'client_id' => env('GITHUB_CLIENT_ID'),
        'client_secret' => env('GITHUB_CLIENT_SECRET'),
        'redirect' => 'https://filament.test/company/oauth/github/callback',
    ],

‼️ The Provider's Redirect URI must look similar to the above (e.g. 'APP_URL/company/oauth/provider/callback')

Example - GitHub

Register a new OAuth application
Application name

Filament

Homepage URL

http://filament.test/company

Authorization callback URL

http://filament.test/company/oauth/github/callback

☑ Enable Device Flow
Click on Register application
Copy the Client Secret & store somewhere safe
Add the Client ID and Client Secret in .env

GITHUB_CLIENT_ID=aluffgef97f9f79f434t
GITHUB_CLIENT_SECRET=hefliueoioffbo8338yhf2p9f4g2gg33

Methodology

The following examples are a visual representation of the features this package supports that were provided by the methods implemented in Laravel Jetstream.
You may find all of the features as provided by the package in the documentation.
Information about a User's companies may be accessed via the methods provided by the Wallo\FilamentCompanies\HasCompanies trait.
This trait is automatically applied to your application's App\Models\User model during installation.
This trait provides a variety of helpful methods that allow you to inspect a User's companies or company:

// Access a user's currently selected company...
$user->currentCompany : Wallo\FilamentCompanies\Company

// Access all of the companies (including owned companies) that a user belongs to...
$user->allCompanies() : Illuminate\Support\Collection

// Access all of a user's owned companies...
$user->ownedCompanies : Illuminate\Database\Eloquent\Collection

// Access all of the companies that a user belongs to but does not own...
$user->companies : Illuminate\Database\Eloquent\Collection

// Access a user's "personal" company...
$user->personalCompany() : Wallo\FilamentCompanies\Company

// Determine if a user owns a given company...
$user->ownsCompany($company) : bool

// Determine if a user belongs to a given company...
$user->belongsToCompany($company) : bool

// Get the role that the user is assigned on the company...
$user->companyRole($company) : \Wallo\FilamentCompanies\Role

// Determine if the user has the given role on the given company...
$user->hasCompanyRole($company, 'admin') : bool

// Access an array of all permissions a user has for a given company...
$user->companyPermissions($company) : array

// Determine if a user has a given company permission...
$user->hasCompanyPermission($company, 'server:create') : bool

📘 $user represents the current user of the application. Interchangeable with Auth::user()

Credits

Notice

If you have any questions please ask
PR's and Issues are welcome
If you have a general question and not an issue please ask in either my package's Discord Channel or make a discussion post.

Contributing

Fork this repository to your GitHub account.
Create a fresh Laravel & Filament Project.
Clone your fork in your App's root directory.
In the /filament-companies directory, create a branch for your fix, e.g. fix/error-message.

Install the package in your application's composer.json file, using the dev prefix followed by your branch's name:

{
    ...
    "require": {
        "andrewdwallo/filament-companies": "dev-fix/error-message",
    },
    "repositories": [
        {
            "type": "path",
            "url": "filament-companies/"
        }
    ],
    ...
}

Now, run composer update and continue by following the installation instructions above.

andrewdwallo / filament-companies

Maintainers

Details