README

Introduction

Most web applications need an OTP(one-time password) or secure code to validate their users. This package allows you to send/resend and validate OTP for users authentication with user-friendly methods.

Version Compatibility

Basic Usage:

<?php

/**
 * Send OTP via SMS.
 */
OTP()->send('+989389599530');
// or
OTP('+989389599530');

/**
 * Send OTP via channels.
 */
OTP()->channel(['otp_sms', 'mail', \App\Channels\CustomSMSChannel::class])
     ->send('+989389599530');
// or
OTP('+989389599530', ['otp_sms', 'mail', \App\Channels\CustomSMSChannel::class]);

/**
 * Send OTP for specific user provider
 */
OTP()->useProvider('admins')
     ->send('+989389599530');

/**
 * Validate OTP
 */
OTP()->validate('+989389599530', 'token_123');
// or
OTP('+989389599530', 'token_123');
// or
OTP()->useProvider('users')
     ->validate('+989389599530', 'token_123');

Installation

You can install the package via composer:

composer require abdullahfaqeir/laravel-otp

Configuration

As next step, let's publish config file config/otp.php by executing:

php artisan vendor:publish --provider="AbdullahFaqeir\OTP\ServiceProvider" --tag="config"

Token Storage

Package allows you to store the generated one-time password on either cache or database driver, default is cache.

You can change the preferred driver through config file that we published earlier:

// config/otp.php

<?php

return [
    /**
    |Supported drivers: "cache", "database"
    */
    'token_storage' => 'cache',
];

Cache

Note that Laravel OTP package uses the already configured cache driver to storage token, if you have not configured one yet or have not planned to do it you can use database instead.

Database

It means after migrating, a table will be created which your application needs to store verification tokens.

If you’re using another column name for mobile phone or even otp_tokens table, you can customize their values in config file:

// config/otp.php

<?php

return [

    'mobile_column' => 'mobile',

    'token_table'   => 'otp_token',

    //...
];

Depending on the token_storage config, the package will create a token table. Also, a mobile column will be added to your users (default provider) table to show user verification state and store user's mobile phone.

All right! Now you should migrate the database:

php artisan migrate

Note: When you are using OTP to login user, consider all columns must be nullable except for the mobile column. Because, after verifying OTP, a user record will be created if the user does not exist.

User providers

You may wish to use the OTP for variant users. Laravel OTP allows you to define and manage many user providers that you need. In order to set up, you should open config/otp.php file and define your providers:

// config/otp.php

<?php

return [
    //...

    'default_provider' => 'users',

    'user_providers'  => [
        'users' => [
            'table'      => 'users',
            'model'      => \App\Models\User::class,
            'repository' => \AbdullahFaqeir\OTP\NotifiableRepository::class,
        ],

       // 'admins' => [
       //   'model'      => \App\Models\Admin::class,
       //   'repository' => \AbdullahFaqeir\OTP\NotifiableRepository::class,
       // ],
    ],

    //...
];

Note: You may also change the default repository and replace your own repository. however, every repository must implement AbdullahFaqeir\OTP\Contracts\NotifiableRepositoryInterface interface.

Model Preparation

Every model must implement AbdullahFaqeir\OTP\Contracts\OTPNotifiable and also use this AbdullahFaqeir\OTP\Concerns\HasOTPNotify trait:

<?php

namespace App\Models;

use AbdullahFaqeir\OTP\Concerns\HasOTPNotify;
use AbdullahFaqeir\OTP\Contracts\OTPNotifiable;
use Illuminate\Foundation\Auth\User as Authenticatable;
use Illuminate\Notifications\Notifiable;

class User extends Authenticatable implements OTPNotifiable
{
    use Notifiable;
    use HasOTPNotify;

    // ...
}

SMS Client

You can use any SMS services for sending OTP message(it depends on your choice).

For sending notifications via this package, first you need to implement the AbdullahFaqeir\OTP\Contracts\SMSClient contract. This contract requires you to implement sendMessage method.

This method will return your SMS service API results via a AbdullahFaqeir\OTP\Notifications\Messages\MessagePayload object which contains user mobile and token message:

<?php

namespace App;

use AbdullahFaqeir\OTP\Contracts\SMSClient;
use AbdullahFaqeir\OTP\Notifications\Messages\MessagePayload;

class SampleSMSClient implements SMSClient
{
    public function __construct(protected SampleSMSService $SMSService)
    {
    }

    public function sendMessage(MessagePayload $payload): mixed
    {
        return $this->SMSService->send($payload->to(), $payload->content());
    }

    // ...
}

In above example, SMSService can be replaced with your chosen SMS service along with its respective method.

Next, you should set the client wrapper SampleSMSClient class in config file:

// config/otp.php

<?php

return [

  'sms_client' => \App\SampleSMSClient::class,

  //...
];

Practical Example

Here we have prepared a practical example. Suppose you are going to login/register a customer by sending an OTP:

<?php

namespace App\Http\Controllers;

use App\Models\User;
use AbdullahFaqeir\OTP\Exceptions\InvalidOTPTokenException;
use AbdullahFaqeir\OTP\OTPBroker as OTPService;
use Illuminate\Http\JsonResponse;
use Illuminate\Http\Request;
use Throwable;

class AuthController
{
    public function __construct(private OTPService $OTPService)
    {
    }

    public function sendOTP(Request $request): JsonResponse
    {
        try {
            /** @var User $user */
            $user = $this->OTPService->send($request->get('mobile'));
        } catch (Throwable $ex) {
          // or prepare and return a view.
           return response()->json(['message'=>'An unexpected error occurred.'], 500);
        }

        return response()->json(['message'=>'A token has been sent to:'. $user->mobile]);
    }

    public function verifyOTPAndLogin(Request $request): JsonResponse
    {
        try {
            /** @var User $user */
            $user = $this->OTPService->validate($request->get('mobile'), $request->get('token'));

            // and do login actions...

        } catch (InvalidOTPTokenException $exception){
             return response()->json(['error'=>$exception->getMessage()],$exception->getCode());
        } catch (Throwable $ex) {
            return response()->json(['message'=>'An unexpected error occurred.'], 500);
        }

         return response()->json(['message'=>'Logged in successfully.']);
    }
}

Customization

Notification Default Channel Customization

For sending OTP notification there is a default channel. But this package allows you to use your own notification channel. In order to replace, you should specify channel class here:

//config/otp.php
<?php
return [
    // ...

    'channel' => \AbdullahFaqeir\OTP\Notifications\Channels\OTPSMSChannel::class,
];

Note: If you change the default sms channel, the sms_client will be an optional config. Otherwise, you must define your sms client.

Notification SMS and Email Customization

OTP notification prepares a default sms and email format that are satisfied for most application. However, you can customize how the mail/sms message is constructed.

To get started, pass a closure to the toSMSUsing/toMailUsing method provided by the AbdullahFaqeir\OTP\Notifications\OTPNotification notification. The closure will receive the notifiable model instance that is receiving the notification as well as the token for validating. Typically, you should call the those methods from the boot method of your application's App\Providers\AuthServiceProvider class:

<?php

use AbdullahFaqeir\OTP\Notifications\OTPNotification;
use AbdullahFaqeir\OTP\Notifications\Messages\OTPMessage;
use Illuminate\Notifications\Messages\MailMessage;

public function boot()
{
    // ...

    // SMS Customization
    OTPNotification::toSMSUsing(fn($notifiable, $token) =>(new OTPMessage())
                    ->to($notifiable->mobile)
                    ->content('Your OTP Token is: '.$token));

    //Email Customization
    OTPNotification::toMailUsing(fn ($notifiable, $token) =>(new MailMessage)
            ->subject('OTP Request')
            ->line('Your OTP Token is: '.$token));
}

Translates

To publish translation file you may use this command:

php artisan vendor:publish --provider="AbdullahFaqeir\OTP\ServiceProvider" --tag="lang"

you can customize in provided language file:

// resources/lang/vendor/OTP/en/otp.php

<?php

return [
    'otp_token' => 'Your OTP Token is: :token.',

    'otp_subject' => 'OTP request',
];

Testing

composer test

Changelog

Please see CHANGELOG for more information what has changed recently.

Contributing

Please see CONTRIBUTING for details.

Security

If you discover any security related issues, please email abdullahfaqeir.dev@gmail.com instead of using the issue tracker.

License

Laravel-OTP is released under the MIT License. See the bundled LICENSE file for details.

Built with ❤️ for you.

abdullahfaqeir / laravel-otp

Maintainers

Details