README

This package allows you to build eloquent queries, based on request parameters. It greatly reduces the complexity of the queries and conditions, which will make your code cleaner.

Basic Usage

Suppose you want to get the list of the users with the requested parameters as follows:

//Get api/user/search?age_more_than=25&gender=male&has_published_post=true
[
    'age_more_than'  => '25',
    'gender'         => 'male',
    'has_published_post' => 'true',
]

In the legacy code the method written below was followed:

<?php

namespace App\Http\Controllers;

use App\User;
use Illuminate\Http\Request;

class UserController extends Controller
{
    public function index(Request $request)
    {
        $users = User::where('is_active', true);

        if ($request->has('age_more_than')) {
            $users->where('age', '>', $request->age_more_than);
        }

        if ($request->has('gender')) {
            $users->where('gender', $request->gender);
        }

        // A User model may have an infinite numbers of Post(One-To-Many).
        if ($request->has('has_published_post')) {
            $users->where(function ($query) use ($request) {
                $query->whereHas('posts', function ($query) use ($request) {
                    $query->where('is_published', $request->has_published_post);
                });
            });
        }

        return $users->get();
    }
}

But after using the EloquentBuilder, the above code refactor as follows:

<?php

namespace App\Http\Controllers;

use App\User;
use EloquentBuilder;
use Illuminate\Http\Request;

class UserController extends Controller
{
    public function index(Request $request)
    {
        $users = EloquentBuilder::to(User::class, $request->all());

        return $users->get();
    }
}

You just need to define filter for each parameter that you want to add to the query.

Tip: It's recommended validates the incoming requests before sending to filters.

Tip: It's recommended present filters inside a filter key in query string like this: user/search?filter[age_more_than]=25&filter[gender]=male
and then get them in this way: $request->only('filter').

Laravel

You can install the package via composer:

composer require mohammad-fouladgar/eloquent-builder

Laravel 5.5 uses Package Auto-Discovery, so you are not required to add ServiceProvider manually.

Laravel <= 5.4.x

If you don't use Auto-Discovery, add the ServiceProvider to the providers array in config/app.php file

'providers' => [
  /*
   * Package Service Providers...
   */
  Fouladgar\EloquentBuilder\ServiceProvider::class,
],

And add the facade to your config/app.php file

/*
|--------------------------------------------------------------------------
| Class Aliases
|--------------------------------------------------------------------------
*/
'aliases' => [
    "EloquentBuilder" => Fouladgar\EloquentBuilder\Facade::class,
]

Lumen

You can install the package via composer:

composer require mohammad-fouladgar/eloquent-builder

For Lumen, add the LumenServiceProvider to the bootstrap/app.php file

/*
|--------------------------------------------------------------------------
| Register Service Providers...
|--------------------------------------------------------------------------
*/

$app->register(\Fouladgar\EloquentBuilder\LumenServiceProvider::class);

For using the facade you have to uncomment the line $app->withFacades(); in the bootstrap/app.php file

After uncommenting this line you have the EloquentBuilder facade enabled

$app->withFacades();

Publish the configuration file

php artisan eloquent-builder:publish

and add the configuration to the bootstrap/app.php file

$app->configure('eloquent-builder');
...
$app->register(\Fouladgar\EloquentBuilder\LumenServiceProvider::class);

Important : this needs to be before the registration of the service provider.

Default Filters Namespace

The default namespace for all filters is App\EloquentFilters with the base name of the Model. For example, the filters namespace will be App\EloquentFilters\User for the User model.

With Config file

You can optionally publish the config file with:

php artisan vendor:publish --provider="Fouladgar\EloquentBuilder\ServiceProvider" --tag="config"

And set the namespace for your model filters which will reside in:

return [
    /*
     |--------------------------------------------------------------------------
     | Eloquent Filter Settings
     |--------------------------------------------------------------------------
     |
     | This is the namespace all you Eloquent Model Filters will reside
     |
     */
    'namespace' => 'App\\EloquentFilters\\',
];

Define a Filter

Writing a filter is simple. Define a class that extends the Fouladgar\EloquentBuilder\Support\Foundation\Contracts\Filter abstract class. This class requires you to implement one method: apply. The apply method may add where constraints to the query as needed. Each filter class should be suffixed with the word Filter.

For example, take a look at the filter defined below:

<?php

namespace App\EloquentFilters\User;

use Fouladgar\EloquentBuilder\Support\Foundation\Contracts\Filter;
use Illuminate\Database\Eloquent\Builder;

class AgeMoreThanFilter extends Filter
{
    /**
     * Apply the age condition to the query.
     *
     * @param Builder $builder
     * @param mixed   $value
     *
     * @return Builder
     */
    public function apply(Builder $builder, $value): Builder
    {
        return $builder->where('age', '>', $value);
    }
}

Tip: Also, you can easily use local scopes in your filter. Because they are instance of the query builder.

Authorizing Filter

The filter class also contains an authorize method. Within this method, you may check if the authenticated user actually has the authority to apply a given filter. For example, you may determine if a user has a premium account, can apply the StatusFilter to get listing the online or offline people:

/**
 * Determine if the user is authorized to make this filter.
 *
 * @return bool
 */
 public function authorize(): bool
 {
     if(auth()->user()->hasPremiumAccount()){
        return true;
     }

    return false
 }

By default, you do not need to implement the authorize method and the filter applies to your query builder. If the authorize method returns false, a HTTP response with a 403 status code will automatically be returned.

Ignore Filters on null value

Filter parameters are ignored if contain empty or null values.

Suppose you have a request something like this:

//Get api/user/search?filter[name]&filter[gender]=null&filter[age_more_than]=''&filter[published_post]=true

EloquentBuilder::to(User::class,$request->only('filter'));

// filters result will be:
$filters = [
    'published_post'  => true
];

Only the "published_post" filter will be applied on your query.

Work with existing queries

You may also want to work with existing queries. For example, consider the following code:

<?php

namespace App\Http\Controllers;

use App\User;
use EloquentBuilder;
use Illuminate\Http\Request;

class UserController extends Controller
{
    public function index(Request $request)
    {
        $query = User::where('is_active', true);
        $users = EloquentBuilder::to($query, $request->all())
            ->where('city', 'london')
            ->paginate();

        return $users;
    }
}

Use as Dependency Injection

Suppose you want use the EloquentBuilder as DependencyInjection in a Repository.

Let's have an example.We have a sample UserRepository as follows:

<?php

namespace App\Repositories;

use App\User;
use Fouladgar\EloquentBuilder\EloquentBuilder;

class UserRepository extends BaseRepository
{
    
    public function __construct(EloquentBuilder $eloquentBuilder)
    {
        $this->eloquentBuilder = $eloquentBuilder;
        $this->makeModel();
    }

    public function makeModel()
    {
        return $this->setModel($this->model());
    }
    
    public function setModel($model)
    {
        $this->model = app()->make($model);

        return $this;
    }
    
    public function model()
    {
        return User::class;
    }
    
    public function all($columns = ['*'])
    {
        return $this->model->get($columns);
    }

    // other methods ...

    public function filters(array $filters)
    {
        $this->model = $this->eloquentBuilder->to($this->model(), $filters);

        return $this;
    }
}

The filters method applies the requested filters to the query by using EloquentBuilder injected.

Injecting The Repository

Now,we can simply "type-hint" it in the constructor of our UserController:

<?php

namespace App\Http\Controllers;

use App\Repositories\UserRepository;
use Illuminate\Http\Request;

class UserController extends Controller
{

    protected $users;

    public function __construct(UserRepository $users)
    {
        $this->users = $users;
    }

    public function index(Request $request)
    {
        return $this->users->filters($request->all())->get();
    }
}

Testing

composer test

Contributing

Please see CONTRIBUTING for details.

Security

If you discover any security related issues, please email fouladgar.dev@gmail.com instead of using the issue tracker.

License

Eloquent-Builder is released under the MIT License. See the bundled LICENSE file for details.

Built with ❤️ for you.

mjahn / eloquent-builder

Maintainers

Details