kattsoftware/firesessions

PHP Sessions management library

v1.1.1-stable 2018-01-14 21:00 UTC

Requires

• php: >=5.4.8

Requires (Dev)

• mikey179/vfsstream: v1.6.5
• phpunit/phpunit: ^4.8 || ^5.7

MIT

• George Petculescu

README

Introduction

FireSessions is a PHP library for managing your project sessions. It lets you store the session data on your local disk, on a Memcached server, or a Redis one; the library can manage 3 types of session variables: user data, flash data and temp data. This library, through all its drivers, supports locking for opened sessions.

Installation

You can install FireSessions by using composer:

composer require kattsoftware/firesessions:^1.1

Configuration

To start using this library, you must set it up, e.g.:

<?php

require_once 'vendor/autoload.php';

use FireSessions\Session;

$config = array(
    'driver' => Session::FILES_DRIVER,
    'cookie_name' => 'fsessions',
    'save_path' => __DIR__ . DIRECTORY_SEPARATOR . 'sessions',
    'expiration' => 7200,
    'regenerate_time' => 300,
    'destroy_on_regenerate' => false
);

$session = new Session($config);

As you can see, the settings are an associative array; they may differ from driver to driver. Below is a list of settings which can be set regardless of the used driver:

Files driver

The files driver will save your session data files on the server's disk. The only setting left here to be set is save_path.

save_path is an absolute full path of a writable directory, where PHP process can put its session files. If it's not set, FileSessions will try to use the session_save_path() function return value.

Memcached driver

This driver will save all your session data on a Memcached server instance.

Here, save_path is a comma-delimited list of server:port pairs:

$config['save_path'] = 'localhost:11211,192.168.1.1:11211';

You may also add a third parameter (:weight), which specifies the priority of a Memcached server:

// 192.168.0.1:11211 has a higher priority (5), while 192.168.1.1:11211 has the weight 1.
$config['save_path'] = '192.168.0.1:11211:5,192.168.1.1:11211:1';

Please keep in mind that this may lead to performance gains or loses; it may depend from environment to environment. If you are unsure, do not set the servers' weights.

By default, the Memcached driver will retrieve the local pool servers (Memcached::getServerList()) available. To disable this, you can use the fetch_pool_servers setting:

$config['fetch_pool_servers'] = false;

Redis driver

The Redis driver will save your session data on a Redis server instance.

For this driver, the save_path setting is a comma-delimited set of connecting parameters names and their values (param=value):

$config['save_path'] = 'host=localhost,port=6379,password=myPassword,database=2,timeout=30,prefix=sessions:';

// host - (required) the hostname of Redis server
// port - (optional) the Redis server port
// password - (optional) Redis authentication password
// database - (optional) which Redis database to use
// timeout - (optional) Redis connection timeout, in seconds
// prefix - (optional) Prefix of the entries names (if not set, the "cookie_name" setting will be used)

Usage

FireSession implements 3 types of session variables: user data, flash data and temp data.

User data

User data represents the collection of variables you set during a whole session lifetime. You can use them to store the ID of logged user, the privileges for a specific user, etc. Simply put, they are the classic $_SESSION variables.

To set user data variable, you can use the following call:

$session->setUserdata('logged_userid', 1234);
$session->setUserdata('logged_username', 'myUsername');

// or

$session->logged_userid = 1234;
$session->logged_username = 'myUsername';

// you may also set the variable by assigning $_SESSION variable:

$_SESSION['logged_userid'] = 1234;
$_SESSION['logged_username'] = 'myUsername';

// you can also set multiple user data at once:
$session->setUserdata(array(
    'logged_userid' => 1234,
    'logged_username' => 'myUsername'
));

However, the recommendation here is to use the $session variables (the Session instance), so you will have consistency all over your project.

To get user data variable, you can use the following call:

echo $session->userdata('logged_userid'); // outputs 1234
echo $session->userdata('logged_username'); // outputs myUsername

// or

echo $session->logged_userid; // outputs 1234
echo $session->logged_username; // outputs myUsername

// or you can use the $_SESSION variable:

echo $_SESSION['logged_userid']; // outputs 1234
echo $_SESSION['logged_username']; // outputs myUsername

Once again, the recommendation is to use the Session instance. :)

If the requested variable doesn't exists, userdata() will return null.

If you need all user data, you can ask for the whole associative array of user data:

var_dump($session->userdata()); // Outputs all user data

To remove user data, you can use the following call:

// removes the "logged_userid" variable
$session->unsetUserdata('logged_userid');

// removes multiple user data
$session->unsetUserdata(array('logged_userid', 'logger_username'));

Flash data

Flash data are the same as user data, except their lifetime is the current and the next HTTP request. After that, they will be deleted.

To set flash data, you can use the following call:

$session->setFlashdata('success_message', 'Your profile has been saved!');

// setting multiple flash data at once:

$session->setFlashdata(array(
    'firstname_validation' => 'Invalid first name!',
    'email_validation' => 'Invalid e-mail address!'
));

To get flash data value, you can use the following call:

echo $session->flashdata('email_validation');
// outputs The typed e-mail address is invalid!

// you can also fetch the entire flash data as an associative array:
var_dump($session->flashdata());

If, after being redirected to the next request, you want to keep flash data for another request, you can use the following call:

$session->keepFlashdata('email_validation');
// Preserves the "email_validation" flash for another request as well

// Preserve more than one flash data for another request
$session->keepFlashdata(array('email_validation', 'firstname_validation'));

To remove flash data, you can use the following call:

// removes the "email_validation" flash data
$session->unsetFlashdata('email_validation');

// removes multiple flash data
$session->unsetUserdata(array('email_validation', 'firstname_validation'));

Temp data

Temp data are similar to flash data, except they live for a giving number of seconds, instead of current and next request.

To set temp data, you can use the following call:

// this will create a temp data 'quiz_score', having the value of 72
// and expiring after 300 seconds
$session->setTempdata('quiz_score', 73, 300);

// setting multiple temp data at once
$session->setTempdata(array(
    'quiz_question1' => 10,
    'quiz_question2' => 0
), array(
    'quiz_question1' => 300, // quiz_question1 will expire after 300 seconds
    'quiz_question2' => 350 // quiz_question2 will expire after 350 seconds
));

// or you can use the same expiration time for all items:

$session->setTempdata(array(
    'quiz_question1' => 10,
    'quiz_question2' => 0
), 300);

To get temp data value, you can use the following call:

echo $session->tempdata('quiz_question1');
// outputs 10

// you can also fetch the entire temp data as an associative array:
var_dump($session->tempdata());

To remove temp data, you can ue the following call:

// removes the 'quiz_question1' temp data
$session->unsetTempdata('quiz_question1');

// or you may set multiple temp data at once:

$session->unsetTempdata('quiz_question1', 'quiz_question2');

You can also check if certain variables exist:

// all of the below calls return a boolean value
$session->hasUserdata('logged_userid'); 
$session->hasFlashdata('email_validation');
$session->hasTempdata('quizz_answers');

If you want to destroy the entire session (which means all types of variables), you can use the following call:

// Deletes the user, flash and temp data + the session cookie
$session->destroy();

Using the SessionFactory

If, for any reasons, you will have different places in your project where you will need this library, you will need the Session instance more than one time. In this case, new Session($config) won't work, because the lib was previously created.

In this case, you can use the SessionFactory in all places, so you will get always the first instance:

<?php

use FireSessions\SessionFactory;

// here goes your config
// $config = array(...);

// A global instance is created
$session = SessionFactory::getInstance($config);

// ... in another place/file, you may get the already created instance again:

$session = SessionFactory::getInstance();

Defining your custom drivers

You may create your own session drivers as well! In this case, you will use the FireSessions\DriversFactory factory.

To do that, you will need to build a class extending the FireSessions\BaseSessionDriver class (this, by its nature, implements SessionHandlerInterface). Besides implementing the SessionHandlerInterface's methods, you will have to implement the additional acquireLock and releaseLock abstract methods as well.

Don't forget that your custom driver should receive the $config array as well.

After that, please call the parent constructor like this:

parent::__construct($config);

Once you are there, you can make use of the already available methods, such as BaseSessionDriver::destroyCookie() and BaseSessionDriver::getIp().

To make your custom driver available for being used, use the following call before instantiating the Session client:

DriversFactory::registerDriver('myDriver', MyDriver::class);

// or you can send the already created custom driver instance:
// $myDriver = new MyDriver(...);
DriversFactory::registerDriver('myDriver', $myDriver);

If you are providing the class name as the second parameter (and not an actual instance of the custom driver), then the factory will try to create an instance by providing $config as parameter.

Now you are ready to use your custom driver!

$config = array(
    'driver' => 'myDriver',
    ...
);

$session = new Session($config);

Acknowledgments

This library closely follows the implementation and the API of the CodeIgniter 3 Session library. Big thanks go to their members and contributors!

License

The library is licensed under the MIT License (MIT). See the LICENSE file for more information.

Copyright (c) 2017 KattSoftware dev team.