amsiam/send-sms

Send SMS through any bulk provider just using single package.

v1.0.0 2025-04-28 13:05 UTC

MIT

• Aslam Mahmud Siam

README

Overview

The Amsiam\SendSMS package provides a simple and flexible way to send SMS messages in Laravel applications. It supports multiple SMS drivers and allows sending single messages, one message to multiple recipients, or multiple messages to multiple recipients. Additionally, it provides functionality to check the SMS balance for the configured driver.

Table of Contents

1. Requirements
2. Installation
3. Configuration
4. Usage
   • Setting a Driver
   • Sending a Single SMS
   • Sending One Message to Multiple Recipients
   • Sending Multiple Messages to Multiple Recipients
   • Checking SMS Balance
   • Static Method Calls
5. Supported Drivers
6. Error Handling
7. Support

Requirements

• PHP: 7.4 or higher
• Laravel: 8.x or higher
• Composer: For package installation
• A valid account with a supported SMS provider (e.g., BulkSMSBD)

Installation

1. Install the package via Composer:

   composer require amsiam/send-sms

2. Publish the configuration file (optional):

   php artisan vendor:publish --provider="Amsiam\SendSMS\SendSMSServiceProvider"

   This will create a config/sendsms.php file in your Laravel project.

3. Register the Facade(optional): Add the SendSMS facade to your config/app.php file under the aliases array:

   'aliases' => [
       // Other aliases...
       'SendSMS' => Amsiam\SendSMS\Facades\SendSMS::class,
   ],

Configuration

The package uses a configuration file (config/sendsms.php) to set the default SMS driver and driver-specific settings. Below is an example configuration:

<?php

return [
    'default' => env('SMS_DRIVER', 'bulk_sms'),

    'drivers' => [
        'bulk_sms' => [
            'api_key' => env('SMS_BULK_SMS_BD_API_KEY'),
            'sender_id' => env('SMS_BULK_SMS_BD_SENDERID'),
        ],
        // Add other drivers here
    ],
];

Environment Variables

Add the following to your .env file to configure the driver:

SMS_DRIVER=bulk_sms
SMS_BULK_SMS_BD_API_KEY=your_api_key
SMS_BULK_SMS_BD_SENDERID=your_sender_id

Available Configuration Options

• default: The default SMS driver (e.g., bulk_sms).
• drivers: An array of driver-specific configurations, such as API keys and base URLs.

Usage

The SendSMS class provides methods to send SMS messages and check balances. You can use it via the Amsiam\SendSMS\Facades\SendSMS facade, which simplifies imports and usage.

Setting a Driver

By default, the package uses the driver specified in the default configuration. To switch drivers programmatically:

use Amsiam\SendSMS\Enums\SMSDriver;
use Amsiam\SendSMS\Facades\SendSMS;

SendSMS::setDriver(SMSDriver::BULK_SMS);

Sending a Single SMS

Send an SMS to a single phone number:

use Amsiam\SendSMS\Facades\SendSMS;

$response = SendSMS::sendSMS('8801234567890', 'Hello, this is a test message!');

Sending One Message to Multiple Recipients

Send the same message to multiple phone numbers:

use Amsiam\SendSMS\Facades\SendSMS;

$phones = ['8801234567890', '8809876543210'];
$response = SendSMS::sendOneMessageToMany($phones, 'Hello, this is a broadcast message!');

Sending Multiple Messages to Multiple Recipients

Send different messages to different phone numbers:

use Amsiam\SendSMS\Facades\SendSMS;

$phones = ['8801234567890', '8809876543210'];
$messages = ['Hello John!', 'Hello Jane!'];
$response = SendSMS::sendManyMessageToMany($phones, $messages);

Checking SMS Balance

Retrieve the balance for the configured SMS driver:

use Amsiam\SendSMS\Facades\SendSMS;

$balance = SendSMS::getBalance();

Static Method Calls

The SendSMS facade supports static method calls, making it convenient to use without manual instantiation:

use Amsiam\SendSMS\Facades\SendSMS;

$response = SendSMS::sendSMS('8801234567890', 'Hello, this is a test message!');
$balance = SendSMS::getBalance();

Note: The facade internally handles instantiation and uses the default driver.

Supported Drivers

The package currently supports the following driver:

• BulkSMSBD: A driver for the BulkSMSBD service (Amsiam\SendSMS\Drivers\BulkSMSBDDriver).

To add support for additional drivers, implement the ISendSMSDriver interface and register the driver in the configuration.

Error Handling

• If the driver is not set or improperly configured, methods like sendSMS, sendOneMessageToMany, sendManyMessageToMany, and getBalance will return null.
• Static calls to undefined methods will throw a BadMethodCallException.
• Ensure the phone numbers and messages are valid for the driver being used (e.g., correct format for BulkSMSBD).

Example of handling errors:

use Amsiam\SendSMS\Facades\SendSMS;

try {
    $response = SendSMS::sendSMS('8801234567890', 'Test message');
    if ($response === null) {
        // Handle driver not set or failed request
        echo "Failed to send SMS.";
    } else {
        // Handle success
        echo "SMS sent successfully!";
    }
} catch (\Exception $e) {
    // Handle exceptions (e.g., network issues, invalid configuration)
    echo "Error: " . $e->getMessage();
}

Support

For issues or feature requests, please contact the package maintainer or open an issue on the package's GitHub repository (if available). Ensure you provide:

• Laravel version
• PHP version
• Package version
• Relevant error messages or logs

For driver-specific issues (e.g., BulkSMSBD), contact the SMS provider's support team.